Anyone know how to disable XAuth for Remote VPN users on the ASA 5510 running 7.2(1)?
HPMFIRE(config)# tunnel-group vpn3000 general-attributes
HPMFIRE(config-tunnel-general)# authen
HPMFIRE(config-tunnel-general)# authentication-server-group none
ERROR: The authentication-server-group none command has been deprecated.
The isakmp command in the ipsec-attributes should be used instead.
HPMFIRE(config-tunnel-general)# tunnel-group vpn3000 ipsec-attributes
HPMFIRE(config-tunnel-ipsec)# isakmp ?
tunnel-group-ipsec mode commands/options:
ikev1-user-authentication Configure IKEv1 User Authentication
keepalive Configure ISAKMP keepalives
configure mode commands/options:
am-disable Disable inbound aggressive mode connections
client Set client configuration policy (DEPRECATED - see 'help
isakmp')
disconnect-notify Enable disconnect notification to peers
enable Enable ISAKMP on the specified interface
identity Set identity type (address, hostname or key-id)
ipsec-over-tcp Enable and configure IPSec over TCP
keepalive Set keepalive interval (DEPRECATED - see 'help isakmp')
key Set pre-shared key for remote peer (DEPRECATED - see 'help
isakmp')
nat-traversal Enable and configure nat-traversal
peer Set xauth and config mode exemption for the specified peer
(DEPRECATED - see 'help isakmp')
policy Set ISAKMP policy suite
reload-wait Wait for voluntary termination of existing connections
before reboot
I couldn't find anything under isakmp to disable it. Thanks for any help.
