04-11-2012 08:06 PM - edited 07-03-2021 09:59 PM
We purchased cisco AIR-CAP1552E-A-K9 and it has IOS c1520-k9w8-mx.124-23c.JA2. WLC with the lastest firmware 7.0.116.0 is not able to connect to the Cisco 1552E. 1552E log show that it can see the WLC but unable to connect. We have devices for both U.S and Australia domain.
Why are the 1552E not able to connect to the WLC?
Solved! Go to Solution.
04-11-2012 10:16 PM
Let me try and will let you know the result.
Thank You,
Francis Paul
04-11-2012 10:26 PM
I was going through other forums and found that it is not possible to change the regulatory domain because regulatory domains are written on to the EPROM in the AP.
Thank You,
Francis Paul
04-11-2012 10:28 PM
yes thats right!!
Regards
Surendra
04-15-2012 02:19 AM
We have a secondary WLC which is not being used. Can we configure this as secondary controller with only one regulatory doamin and use for mesh devices ?
Thank You,
Francis Paul
04-15-2012 02:42 AM
Francis:
Yes you can.
However, If APs on different WLC's can hear each other then the RF groups may not be formed although same RF group name is configured on two WLCs.
For RF-Groups to work among multiple WLCs it needs same countries to be configured on all WLCs with same order. see multiple countries guildlines:
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70lwap.html#wp1147755
If your 1552 APs are not on same location as othe APs on the other WLC (each WLC has its APs in different locations and APs from first WLC do not hear signals from APs on second WLC) then you can do it safely by dedicating one WLC for the mesh APs while that WLC is configured with one country only.
HTH
Amjad
08-08-2014 11:33 PM
I have wlc 5760 and my AIR-CAP1552E-C-K9 ios c1520-k9w8-xx.152-4.JA1 not joing to controller
show log
*Aug 9 12:37:19.999: DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_connection_db.c:2134 Max retransmission count reached!
*Aug 9 12:37:26.047: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.2.2.5:5246
*Aug 9 12:37:26.047: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
*Aug 9 12:37:26.047: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Aug 9 12:36:50.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.2.2.5 peer_port: 5246
*Aug 9 12:36:50.327: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.2.2.5 peer_port: 5246
*Aug 9 12:36:50.327: %CAPWAP-5-SENDJOIN: sending
% CDP is not supported on this interface, or for this encapsulationJoin Request to 10.2.2.5
*Aug 9 12:36:50.335: %DTLS-5-ALERT: Received WARNING : Close notify alert from 10.2.2.5
*Aug 9 12:36:50.335: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.2.2.5:5246
*Aug 9 12:36:50.339: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Aug 9 12:36:50.327: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.2.2.5 peer_port: 5246
*Aug 9 12:36:50.331: %CAPWAP-5-SENDJOIN: sending Join Request to 10.2.2.5
*Aug 9 12:36:50.335: %DTLS-5-ALERT: Received WARNING : Close notify alert from 10.2.2.5
*Aug 9 12:36:50.335: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.2.2.5:5246
*Aug 9 12:36:50.379: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
Waiting for response.......
08-28-2014 01:41 AM
5760 WLC does not support 1552 APs. it doesn't support all outdoor mesh APs (1500, 1510, 1520, 1530 or 1550).
Reference: http://goo.gl/NLub9j
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide