Wireless

A quick update for those of you who might not know. 802.11n has been approved by the IEEE taskgroup N and has been moved for a September vote in RevCom. This means that .11n is really close to full ratification and should be fully ratified by year en...

We are going through recovery scenarios for wireless controllers and this question came up. Can you take a WiSM from one 6500 host and slap it another provided the VLAN and etherchanneling are already set up? Or would the WiSM itself need a partial o...

Hi,(1) I would like to know what is the disadvantage of using H-REAP vs Local AP (AP tunnel back to WLC)?I have read through the documentation and my conclusion as follows:H-REAP Pros = conserve bandwidth especially if there is local servers at that ...

I am having AP 1131, with SSID - cisco vlan 31 and SSID -voice vlan 103, in my laptop I am able to see cisco ssid but not voice ssid, please light me what I am missing.I have brand new 7921 IPPhone, in that I configur SSID as voice and cisco, but it ...

Hi Cisco Wireless,Is there going to be a module to replace the WiSM for more processing speed? WiSM+ or WiSM-E (Enhanced). Looking at the 5508 and it's future capabilities to support up to 500APs. Want to know if Cisco is planning on adding the capab...

Hi,we have some Cisco APs, their 802.11a/n radios show as DOWN, and regulation domain :not supported. Is there is way to change 802.11a's regulation domain from N to A?Thanks!

Hi All,I have configured tacacs for WLC. But I am not able to login to WLC using TACACS username and password.Getting following messageTue Sep 22 15:26:50 2009: Forwarding request to 10.0.0.16 port=49Tue Sep 22 15:26:50 2009: tplus response: type=1 s...

Hi,I'm a rookie, and have just incorporated a WAP4410N into our offices' network. I am running the default unsecure setting and have been able to log on with my mac airbook running 10.6 and access the internet. Everything works great. Now I am attemp...

How change MAC address after "bia"?000f.f858.a9b5 (bia 000f.f858.a9b5)command - conf t int d0 mac-address AA.BB.CC-only change MAC address before "bia"((???????

Hello i need info about WDS configuration o other cisco feature:I have n°15 CISCO AIRONET 1310GE, andn° 5 AIRONET 1142, is possible set all ap to WDS mode?Only one SSID!These models of AP have this feature?TNX

Good day!I have a trouble with configuration local mac auth and encrypt WPA.When works only Mac auth and no encrypts all work. but when added command in ssid and dot 0 for encrypt client not connected((I founded on cisco faq what after 12.3.8JA2 cisc...

WLC 4404 (6.0.182.0)Recently I have been getting event logs in my WCS about an AP being spoofed and contained. I check the logs and it gives me no information about the rogue AP/client that could be causing this. It happens at random and not very o...

I can see what username our devices are using when I issue the command "debug radius authentication" on our 1242 AP. I'm trying to discover what password they are using, is that possible?