Wireless

Hi there,We have mounted some access points in a couple of cinemas and we are concerned that the lights on the AP's will be a distraction. Does any one know if it's possible to turn off the status LED on the face of the Access Point, and how to do it...

Hi Experts,Is it possible to do password recovery on AIR-WLC4402-12-K9. HTTP/HTTPS login credential is lost.Thanks

I have two WLC 4400 and the APs are registered in the WLCB, but I need that the APs are registered in the WLCA. In the Wireless / Access Point section, I configure in the field "Primary Controller Name" the name of the WLCA, but AP are restarted but ...

Good evening,I need a wireless PC card software for my AIR-PCMCIA350. I can't use the Windows XP wireless client because I setup my Wireless AP to use WPA-Personal and XP doesn't support that encryption.I would like to setup this card on my IBM 560 ...

I'm trying to get an AP to join my controller at work from my house. I've got standard DSL from Frontier, so no QoS for the LWAPP traffic. The controller sees the DISCOVERY request from the AP, and the AP indicates that it receives the DISCOVERY RE...

Hi all,Microsoft clients use auto-enrollment for windows and laptops.There is (I beleive) no such thing for Cisco IP phones currently.If we put the certs on the phones manually, is there a way that the phone can indicate to the CA when the cert is ab...

We've been working around a number of code version bugs on our wireless controllers (WiSMs/4402s) and are looking to upgrade code from 4.2.130.0 to something else. Anyone have any recommendations based on experience?

I have a 3750G intergrated wireless controller and a LAP1131 AP. My wireless clients get an IP address from my dhcp server but are unable to communicate with anything once an IP has been established.

HelloI have a real puzzle here:We have around 30 1231 LWAPP AP that have been removed from the network when we ran 4.2.61.0. The flash was cleared of config files and the en_vars file. We are now trying to redeploy them on the netowrk, which is now r...

We have 18 controllers running 4.2.176.0.We have a captive portal page for our guest access WLAN using web passthrough.We have a custom Accept Page. Our legaleese on that page is sooooooo long that I want to know if we can simply place a URL on our ...

Hi, I'd like to know on how can i prevent this from happening? i get a lot of this messages lately: is there a way to resolve this? what does this really mean? is it a major network attack?IDS 'Res mgmt D' Signature attack detected on AP 'AP1' protoc...

I have a controller that has 4 SSID's (3 corporate and 1 guest ssid)configured with 10 AP's. I want only 1 of the AP's to advertise all 4. This is my conference room and we will only allow guest access in the conference room. The other AP's need t...

Hi,I've deployed a wireless bridge using 2 Aironet Bridge 1310, configured with 4 sub-interfaces to carry 4 Vlans over the radio bridge.The native VLAN is the VLAN 1, it's rightly configured on the trunk interfaces but I cannot ping the directly conn...

Hi,Currently have a wireless deployment in a building across 3 floors. Have deployed AP/Mobility Groups to enable the use of a different subnet on each floor of the building. I have tested Roaming throughout the building and all appears fine.However,...

I have a Aironet 802.11a/b/g Wireless Lan cleinte Adapters (PI21AG) and I'm trying install in DELL workstation 3400 with Windows XP Professional 64 BITS, but not install. return the next message:"The installer can not run on this plataform. Please se...