Wireless

Hi,I have two 1242s making a 5GHz 'link/WGB' and then LWAPP access point behind the WGB. The link keeps losing connection every now and then. I debugged the WGB and the following log keeps popping up:'parent lost: Received deauthenticate (2) not vali...

root(wireless client) --- non-root(wireless client) --- non-root(wireless client)Does this topolji works?Links between bridges are wirelessThanks

I'm running a 4402-12 with 4.2.176 and all 1252 access points. I'm able to get the 2.4GHz radio powered up but not the 5GHz. I've tried powering the AP off of the new 18W power injector and off the power brick with no luck on each. I watched the A...

Cant ping or https on WLC 4402 connected a giga 3com switch, any idea ?i configured managmente ip on the wlc

Looking for information that the sniffer trace just doesn't show me. I have the AP setup in sniffer mode. I went to the controller that the AP is homed to. I'm capturing the data to wireshark. I'm debugging the packets as AiroPeek. I can't seem to ca...

Hi,I'm trying to set up a simple configuration with WLC2106 ver 5.0.148.0 and two LWAP1131 connected to port 7 and 8 (PoE) on WLC2106.I have only these interfaces:ap-manager: 10.1.1.3/24 untagged port 1management: 10.1.1.2/24 untagged port 8virtual: ...

Hi guys ,Anybody kown what maximum number of user can connect this ap ? And how many users can use ip communicator for voip ?ThanksJorge.ff

After following configration i am trying to access the router by GUI. But i am not able to. kindly advice.Interface Name Port Vlan Id IP Address Type Ap Mgr Guest-------------------------------- ---- -------- --------------...

From what i have read on the LAP1524PS product data sheet, it looks like this radio is designed for b/g and 4.9 licensed access. Are there any restrictions to using this device in a non-public safety situation, say a commerical environment. The only ...

Hi NetPro.EAP-TLS is working now, but how to configure EAP-FAST as the backup in case TLS is failure then user still able to use FAST as the second choice ?your reply will be highly appreciated.thanks heaps.Jack

Hi,I have a few questions regarding ACS Express' binding user for Active Directory integration:1. Does the user have to be a service account in Active Directory?2. Let's say the AD administrator pre-created the computer account manually, does the bin...

I'm running 12.3(8) JEA3 on a Cisco AIR-AP1220-IOS-UPGRD (PowerPC405GP) processor with 15138K/1236K bytes of memory.Any way to broadcast more than 1 SSID?AP-CIS1200 -(config-ssid)#guest-mode Dot11Radio0: Guest-ssid already existing on ssid XXXX• Su...

This was working last week and today when I am trying to https to the box and nothing happens. It has been almost 10 minutes and still waiting for https:// . I can ping and getting response from the device fine.Anyone has any ideas to fix this?Than...