Hi - can anyone pls send me a link for step by step instruction of how to setup guest and non-guest users? This is first time setting up. Appreciate your help, DJ
Hello,I have a WLC 2112 and a DHCP server enabled on a Linksys router. I have configured a wireless LAn to have IP address from the Linksys DHCP server but it doesn't work and when i configure anthor DHCP server it work. Can you help me please
Here's the situation:We had an AP that had a BVI address of 10.1.1.5. There was also an address on FA0 and D0 of 10.1.1.5. We needed to add a second address on the AP, but couldn't. (Option was there but wouldn't take.) So, we changed the address on ...
Customer does not want username/password, but a simple click OK to acceptable use policy.Can I do this with a Web Authentication Template in the WCS? They don't want a lobby ambassador, etc.
Hi there,is it possible to configure WPA2 on a standalone C871W? The configuration examples always talking about WPA & WEP.Any experiences? Thank you!Andy
Hi, I've some questions about Guest Tunneling, since the docs on CCO is not so complete.Right now I've 2WLC4400 Series in a redundant way with 2 WLANs, 1WLAN per AP Group. All the APs are setup as H-REAP node.We've to setup a WLC in DMZ so that Guest...
We have 1242 AG access points deployed for Wi-Fi access in LWAAP mode. After joining the APs on to the controller we try to configure the SNMP strings for the APs on the WLC but cannot find anywhere to do it. Is snmp supported in the lightweight AP i...
does anyone know what these stand for, when a customer switches his isp to another isp he gets the dssn and dssa messages and cannot do BLF at that point for lines that are busy!
I have a WLSE 1130 that the previous admin had just sitting on a shelf not being used, in fact, I don't think it's ever been used. I had powered it on to give it a basic config, IP, ect. and I issued the shutdown command and powered it off. Now, wh...
I'm using the Cisco Aironet Site Survey utility along with Cisco Air-CB21AG-A-K9 Adapter, I'm having problems getting the proximeter beeper working, is this a bug in the software or is there a way of getting it working, I have it enable and PRX shows...
My environment is a jet hanger - two actually. Each is about 300 ft wide by 100 ft deep. And they are perhaps 30-40 feet high. A predecessor mounted two Cisco APs in each hanger - mounted them high. They use TKIP for auth. The problem is that us...
I have a cable internet connection in bldg 1 where we have a wirelss internet connection (on a linksys wrt54g)set up for our customers for free public access. I have another computer in bldg2 which is about 600 feet away with clear access no trees no...
I have WCS ver 4.1.83.0. I'm trying to apply an AP template to my APs. But when I try to search the APs by using Floor Area, I'm getting error saying "Failed to contact server. Please make sure you are logged in and have network connectivity.". (See ...
In a secure wireless environment (WPA2/AES) with centralised RADIUS authentication using PEAP are there any recommended reauthentication timers? I have tested this with MS IAS and currently have a 30-minute Session-Timeout. I was just wondering if ...
