Cisco Wireless LAN Controller 4402 can support lightweight access point 1242 over wireless backbone or need ethernet connection?
Cisco Wireless LAN Controller 4402 can support lightweight access point 1242 over wireless backbone or need ethernet connection?
Hi,Anybody outhere had experience problem with non-cisco antenna connected to Cisco AP? I had this one external antenna 12 DBi outdoor omni that connected to Cisco AP1242AG - LWAPP. The performance that not really realistic and the signal keep showin...
Hi there,I got the strange messages on my wism(v4.1.158.0)Jul 03 14:41:24.148 apf_foreignap.c:1246 APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:00:1a:70:a6:b9:feJul 03 14:41:22.821 apf_fore...
I have several 1130AG LWAPP's running 12.4(13d)JA connected to a contoller running 5.0.148.2 SSID's are broadcast - usually no problem.However, I've noticed that several different vendor wireless cards cannot see both SSID's.Running a wireless captu...
Hi All I have problem with my wireless access point when I connected to the wireless adapter I can not ping one IP address, other ip responds. The ip address that I can't ping is a network load balancing address between to server'swhen I is connected...
I need to intall 04 Aps in an area where all of them have contact. I now know that the best practice is to use the three channels combination, but what would be the best way to do it? How could I use the 4 APs considering that two of them will be in ...
Hi All,please can somebody help?I was doing a simple test today with 2 AP's, both AP's are powered by Cisco Power Injectors. I was expecting that my client would simply switch association from one access point to another if I disconnected the etherne...
Hi all,I have one servers running WCS v4.2.62.11. It is a Window server 2003 R2 standard edition service pack 2. I am currently going to patch Microsoft vulnerabilities patching on it. Is it going to impact WCS? Anyone has encountered installing Micr...
Hello, We are trying to get a 1242AG access point to have users connected to it to authenticate on it to the ACS server. The 1242AG has a new menu - AP authentication. Has anyone delt with this menu and gotten this setup to work? Version is 12....
In the GUI of a 4402, I have 2 - one way deny rules for http and https traffic.If I block 1 way, do I have to block the other way too?If so, why?Thanks!
I have a 1310 that I need to convert to autonomous IOS mode. For this I have the 1310 connected to a 2100 WLAN controller. The problem is when I run the config ap tftp-downgrade command the ap returns the following error messageexamining image...%Err...
I have a remote site customer with a Cisco WLC 4404 and 1130 Access Points. They are using SpectraLink wireless phones with no probem for about 6 months. Recently, there is about a 1 second latency when using the IP Phones. NetStumbler is seeing vari...
Hi,I have a Cisco Aironet AIR-AP1120B-A-K9 802.11b Wireless Access Point. Can I integrate this AP with AIR-WLC2106-K9. Thankx and regardsSatish
So far, we have been told to continue to use the guidelines for 802.11b/g when designing for 802.11n.However, there are, no doubt, additional considerations that we will need to account for.For example:* If the coverage quality is increased with 802....
Anyone knows what the "Config Guest-lan Webauth exclude" command does in 5.0 controller code? Doesn't seem to be documented anywhere.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-12-2024 05:27 AM | ||
04-10-2024 01:01 PM | ||
04-05-2024 06:44 PM | ||
04-04-2024 03:18 AM | ||
03-27-2024 07:38 AM |
User | Count |
---|---|
13 | |
4 | |
2 | |
2 | |
2 |