Hi, I have just connected my 1130ag ap to the network noticed that it can not get a Join response. as follows; bymydesk# *Mar 1 00:00:25.294: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY *Mar 1 00:00:35.698: LWAPP_CLIENT_ERROR_DEBUG: spamHandle...
After I restarted my WCS-server(win2003) the WCS service will not start. I get this messages:"A system error has occurred""System error 1067 has occurred""The process terminated unexpectedly""Failed to start the WCS server"Any tips ?Don't ask if I ha...
I have installed the latest version of the tool, 3.4, and installed it on an XP SP2 box. Everything looks good, but when I start it returns "C:\Program Files\Cisco Systems\Upgrade Tool\images\c1310-rcvk9w8-tar.124-10b.JA3 - LWAPP Recovery Image is n...
Hello everyone, I posted this in General Forum first, but i wanted to hit this group as well.On an AP1200, can you set up two different SSIDs on a radio interface using two different types of encryption, without using vlans? I am trying to use WEP fo...
Hi,We have a remote site with a 2811 running 12.4(13r)TThere are 4 BRI ports and 2 FXS ports.I have a fax connected to fxs 0/1/0The dial-peers are configured like this : dial-peer voice 7575 pots destination-pattern 7575 port 0/1/0The voice-port has ...
If I configure a WLAN to use 802.11b/g and another WLAN to use 802.11g only in an LWAPP environment (i.e. 4400 Series Controller with Cisco 1242 LWAPP Access Points), will the clients who connect to the WLAN that uses 802.11g only drop their data rat...
In my 3-building campus, we have deployed Airespace 4136 WLC, and Cisco AS1000 and AS1200 APs throughout the campus. 8 APs per floor, serving an area of up to 40 users per AP. However, most users connect using Ethernet cable. My problem is that the A...
I have a large outdoor mesh network with 150-200 1522 and 1510 radios. We are in an area that 5.8 meshing is not really possible, but it is all the radios can currently do.The only hope, other than having a radio in front of every subscriber's house)...
Hi there,We have an 1131AG that is not working properly, I dont see any antennas in the running -config and the R led is blinking RED 1 time and 2 time. What can I do wih this AP? Is there some reset procedure? I've already reload the IOS.Thanks
For some reason the 7920 is trying to Downlaod the config file and can't pass that screen.It authenticates just fine and the i get the screen "downloading config file" and that's it.It's been doing the same thig all morning.Not sure what's going on.p...
Hello,I have an 1131AP configured on a network and the problem that I have is when WEP encryption is added, none of my clients can obtain an IP address from the DHCP server. As long as security is not enabled, all clients can connect and obtain an I...
