Wireless

I came to cisco.com looking for the latest driver for a "Cisco Aironet 802.11a/b/g Wireless Adapter". I initially installed the driver off the CD, but since there are some mysterious problems with the adapter, I thought it might be worth trying the l...

Hi guys I have a WLSE version 2.15.1 which is configured to detect Rogue AP, APs are 1242, when I see the Unknown AP detail the RSSI has a value of 0 for all Rogue AP detected any help or suggestions, I will be very useful. Thank you. Greetings

Does anyone know if WCS can use (as a Spectrum Expert) Fluke's Spectrum Analyzer software (The same OEM as Cognio)?

Need some advice, I have 2 SSID's set on the dot11radio0 interface each on a seperate vlan with mbssid set. All works fine. I can associate ok to either and vlan trunking is working. Whenever I power down the AP for any period of time and restart,...

Hello all. I'm trying to do what I thought would be a simple config. 2 APs connected directly to a controller. The controller's 2 management interfaces are in our management VLAN (used for all switches, servers, etc), and I created a new VLAN for the...

On WCS the client traffic is shown as Kbps.. whcih I feel is too low. I cannot understand the average for 6hrs in Kbps.Anybody who can decode this for me?

Hi all;I have this scenario:Ten access points and one WLSE Express. One is configured as WDS with a priority of 254, other access point as WDS with a priority of 128, and the other as Infrastructure AP's. The infrastructure AP's are authenticating to...

Hey everyone,I'm having a strange problem, and I'm having trouble figuring it out. I'm running two 4402 controllers connect via dot1q trunks to a 6509 (Native VLAN 1).I have been creating VLAN interfaces on the controllers and assigning them to WLAN...

I heard from a Cisco representative that communication between the APs and the controlleur(s) should be less than 100ms. Did anyone experienced problems by not respecting that restriction?This restriction would have an impact on our design. Originaly...

We have already in place 1 X Cisco Aironet 1250. We are thinking of purchasing additional 4. Please confirm if the Cisco Aironet 1250 can be connected all together (bridge) so that if a person is on Cisco Aironet 1250 access point 1 and moves to diff...

Hi, one of our customers got problems with his clients after we installed a 1250 in his radio range. The 1250 is connected to a different network and also has a different ssid. His own Cisco APs installed 5 Meters away and the 1250 is about 150 Meter...

hi allI have recently set up wds on my lan, I have added the server groups as per instructions, my question is what is this client and infrastructure authentication for? as Im already using wep for my encryption.can anyoone help

We are running a WiSM version 4.2 and we are facing a big issue regarding regular (each 30mn.) deconnections.After lot of debug and trace, we have found it is due to the WiSM which is asking APs to re-authenticate (802.1x dynamic WEP) when the timer ...

I'm about to send a work instruction to a contractor to build one patch panel on each rack, so that they can connect to each other. I'm not sure what cable should be used betwn two patch panels, and betwn routers and patch panels? is there an industr...