Wireless

Hi, all,I am having a weird user authorization problem with 3 out of 4 1240AG APs , aaa TACACS+ is configured on all APs with exactly the same AAA configuration (authentication, authorization, accounting etc, cut & pasted)Whenever I try to login thro...

We have a notebook "HP Pavilion tx1000 (AMD Turion64 CPU with Vista 32bits)". The notebook is using Broadcom 802.11a/b/g chipset, running AMD and Vista. It cannot associate to WLAN using MS-PEAP and WEP-128. Also, it cannot associate to PEAP and WPA2...

I just want to know, is there any advantages of my deploying a draft-N network at this time? I know a lot of business are slowly moving from their current 802.11a/b/g network to a draft-N network buying draft-N products. Correct me if I'm wrong, but ...

Hi,i have some Cisco aironet 1510,how to configure :1510 A backhaul always connected to 1510 B backhaul.Thanks, Lian

Hi All,I'm about to install a guest anchor controller on our firewall. Do I have to connect the service port to the DMZ, or (as I suspect) is it safe to connect it to the internal network as no traffic should flow between the distribution and service...

Hi all,I have a 877W router. Unluckily WiFi signal in my house isn't so good in all rooms where I need to use it both for long distance and for walls. Does it exist a signal expander that I can put around in my house which catches and repeats the sig...

Can the 1240AG be configured to include the TPC Report element (802.11h) in beacon frames? Alternatively, does this AP respond to TPC Request elements? Thanks!

Is it possible to have multiple aaa entries for RADIUS servers on a Cisco Aironet?What im trying to achieve is two SSID's, one on one VLAN and another on another VLAN..The trouble is that our RADIUS servers are using MSCHAP v2 authentication and they...

When mapping out a floor plan for the 1131AG AP, what is the range of the device. The documentation says 100FT, I assume that is a radius? Any detail would be helpfule.

"Radar signals have been cleared on channel 136" What does this mean?

HI Guys,I have installed the ACS Remote Agent on my AD Controller. I can add the agent to ACS.... but i cannot see the Windows authentication avaiable in the agent.. The Agent is running with a service account that has full AD rights.Anyone able to h...

Are there any tricks with u/g to 4.1.185.0 with WiSM). It's size it 37,511,776 bytes.Current s/w is 3.2.171.6 on WiSM (it's new & came with this.)TFTP keeps dying at exactly the same bytes at every attempt. I've tried 3COM & Pumpkin TFTP servers & sa...

Hello!I have a quick question for you guys (or girs for that matter I have a Cisco Aironet 1100-series access point with current firmware 12.3(8)JEA, but want to upgrade it if possible.I did take a look at the Cisco download pages and found these alt...

I'm having this problem for some users, but not all.Users are logging in via web-auth on the WLC and some are getting denied because on the radius its saying they have exceeded their max-sessions. The max-sessions in the user group is set to unlimit...