Wireless

I am configuring a number of Cisco AP 350s for Cisco LEAP. If "Rotate Broadcast Key" is enabled, is it necessary to enter a static WEP key to be used to encrypt broadcast/multicast packets? If Cisco LEAP only is required (Network EAP is enabled as an...

Hi. Can anyone tell me if a Cisco Aironet 340 Bridge (BR342) acting as an access point will support LEAP. Does the client have to support it? Or does the access point have to support it? Or both? If Windows XP supports it, does a 340 client adapte...

Does anyone know if the 350 Work Group Bridge has any limitation on protocols it supports and can pass. Trying to get Novell clients to pass through a WGB to an access point that sites on the Network whrere ther servers reside.-pat

I was curious to see if anyone has ever heard of this error message, TAP Terminate. It is an ASCII text message that is being generated on several of our RF Scanning Guns. The guns are connected to the network via RF AP using IEEE802.11 technology. S...

We are designing a wireless infraestructure and we are now thinking about security. We have 350 Series Lan Adapters in clients, 350 Series in Access Points, and two ACS 3.1 for authentication. We have read a lot about WEP keys, LEAP, etc, and we are ...

I'm trying to get MobileIP working on a 2621 router. I've had some succes, but it doesn't work right just yet. I can get the MN to move from its home network into a foreign network just fine, but then the MN won't move back into its home network af...

We have a number of wireless clients (running WINNT 4.0) all with Avaya PCMCIA cards connecting to a pure Cisco environment:8 x Catalyst 3550-24 switches with 1000BaseSX uplinks connecting each throughout a warehouse environment. (Spanning tree is di...

Does anyone know if it is possible to use the card out of a PCI352 in a normal laptop slot? I pulled the card out, and it appears to not work when I insert it into the PCMCIA slot. It there a firmware flash that I can do, or am I just out of luc...

I have a 350 Bridge setup as a client that keeps reporting "Lost Authentication with Parent". When this happens is de-associates from the root bridge and conectivity is lost. It then reassociates with the root and goes on. The root bridge logs tha...

Hi! I´d like to install a WLAN in a building with several floors. At each floor I want to Install one Aironet 1200 AP. Does every AP need a other channel or must I use the same channel on each AP for roaming? Any help would be appreciated! Thank you,...

I am just starting to test wireless connectivity with Windows XP laptops, but am having problems with basic file transfers.We have been using WLANs with Windows 2000 successfully for 2 years now and have not had any issues with this. What is happeni...

I guess Cisco does not want to do bussiness with companies such as my company which uses many thin clients and do not have any expansion slots and have to use the USB/Firewire ports for expansion.In order to take advantage of the additional securit...

ACS 3.1 introduces PEAP support:PEAP support—PEAP provides a new, secure, client-server authentication method for wireless networks. PEAP also provides new support for one-time token authentication, password change/aging and powerful extensibility of...

I've read this passage on Cisco web site:To use PEAP authentication, you must install the PEAP supplicant during ACU installation or Service Pack 1 for Windows XP. This Service Pack includes Microsoft's PEAP supplicant, which supports a Windows usern...

I'm using two wireless bridge to connect only two PCs. Actually i can reach only a data rate of 3.6 Mbs. I've pick this value looking the statisstics menu.There's anyone that could help me to congigure my bridge in order to reach higher data rate???...