09-14-2007 06:46 AM - edited 07-03-2021 02:37 PM
I am trying to create a wireless bridge with 2 1200 AP.
The "Client" is giving me this error message:
Interface Dot11Radio0, cannot associate: No matching privacy setting (from 001b.d5c8.ce80)
This is the master config:
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname Bclap-ad01
!
enable secret xxx
!
ip subnet-zero
!
!
aaa new-model
!
!
aaa group server radius rad_eap
server 172.30.103.178 auth-port 1812 acct-port 1813
!
aaa group server radius rad_mac
!
aaa group server radius rad_acct
!
aaa group server radius rad_admin
!
aaa group server tacacs+ tac_admin
!
aaa group server radius rad_pmip
!
aaa group server radius dummy
!
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
!
dot11 ssid Wireless-Bridge
authentication open
!
dot11 network-map
!
!
username Cisco password xxx
!
bridge irb
!
!
interface Dot11Radio0
description 802.11G Radio
no ip address
no ip route-cache
!
!
ssid Wireless-Bridge
!
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0
station-role root access-point
rts threshold 2312
antenna receive right
antenna transmit right
antenna gain 14
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface Dot11Radio1
no ip address
no ip route-cache
shutdown
speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
station-role non-root
bridge-group 1
bridge-group 1 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
bridge-group 1 spanning-disabled
!
interface BVI1
ip address 172.30.103.178 255.255.0.0
no ip route-cache
!
ip default-gateway 172.30.4.70
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
!
radius-server local
nas 172.30.103.178 key xxx
user Chapais-AP nthash xxx
!
radius-server attribute 32 include-in-access-req format %h
radius-server host 172.30.103.178 auth-port 1812 acct-port 1813 key xxx
radius-server vsa send accounting
!
control-plane
!
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
!
end
This is the client config:
Can you help me find the error in my setup ?
09-20-2007 11:03 AM
This has to do with mismathced encryption setting on the client and access point. Make sure encryption setting match. Refer URL
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide