08-04-2008 06:18 AM - edited 07-03-2021 04:16 PM
Hi All,
Please help me on this issue:-
I am currently running 3.0 version on my WLC 4402 and i want to upgrade it to the latest versions. I am following the correct procedure mentioned in the cisco link but its failing.
The error is TFTP Path is getting as:c:\temp\/ error and the firmware is not getting uploaded,
Plz see the snap shot and let me know what am i doing wrong.
08-04-2008 01:24 PM
change your file path, by deleting c:\temp\/ and just use /.
TFTP Path = /
Hope this helps.
08-04-2008 09:06 PM
Hi Krishan,
TFTP Path=/ :- It takes automatically.
I have tried both ways as mentioned below
Example:-
(Controller) # Transfer download path c:\temp\
and
2)
(Controller) # Transfer download path c:\temp
But the result is same nothing happens. Kinbdly let me know why is this happening.
Thanks in advance.
08-05-2008 01:24 AM
I would not use c:\temp just make sure that you point your tftp server to the folder where the file is:
(Controller) # Transfer download path /
08-05-2008 01:26 AM
also make sure that your tftp server supports files of a 30Meg, tftpd32 is a good tftp server.
08-19-2008 12:54 AM
Hi Kris,
Still i am facing the same problem.Now i have downloaded the tftpd32 and I tried connecting via the Service Port interface which has a different IP address. I conneced to the controller via the console cable to issue the commands but it still will not transfer. I can ping the tftp server from the Controller. I used the paths specified , ie , "." and "./" but stil the result is same.
Kindly let me know if there is any thing missing?
Thanks in advance.
Usman
08-05-2008 02:55 AM
Thanks Kris,
I will check this and update you with the results.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide