Hi everybody, hope you are fine. I'm trying to implement BFD between two ASR9001 routers and a Palo Alto PA-5250 Firewall. I've configured BFD on the routers (under OSPF process)and the Firewall but they are not seeing each other, BFD sessions are no...
If you modify a BGP neighbor-group that is apllied to established BGP neighbors, does that reset the neighbors that are using the group?
Is there a way when using netconf-yang and ncclient to get a diff of changes from edit_config before commit() is called? From CLI i'd want something like the output from 'show commit changes diff' but not seeing any ways to do this from ncclient.
Hello my chassis have a error logging about L3 CACHE ERROR，is my hardware wrong and need RMA？ LC/0/2/CPU0:Apr 22 06:49:32.597 : p40x0mc[75]: ====== L3 CACHE ERROR #1 ====== LC/0/2/CPU0:Apr 22 06:49:32.648 : p40x0mc[75]: CPC Registers: OFF ...
Hello, Could you please let me know if it possible to install 2 x A9K-MPA-4X10GE on ASR9001S ? The A9K-9001-120G-LIC is already installed. The running software is 4.3.2 Thanks
Hi, I would like to confirm the below tagging? Im bit confuse 1. In this scenario all vlans coming from Customer A will have a new tag of 100 (S-TAG) and once the frame reaches the other end/PE02 swtch will strip off the additional outer vlan. ...
I configured following setup: PE: I match outer tag and POP it, then Xconnect to BNG. BNG: PWHE is used for termination, at present no BNG dynamic profile is uses, just a simple subif. Issue is, PWHE is up, but not sending any traffic, only receivi...
RP/0/RSP1/CPU0:ios#dir usb:Sun Dec 7 19:18:12.309 UTCDirectory of usb:131136 -rw- 2281144320 Mon Dec 8 09:08:46 2014 ark9k-px-k9.tar69618 drwx 32768 Sun Dec 7 19:07:07 2014 LOST.DIR8006893568 bytes total (5725683712 bytes fre...
Hello, What is the show command to see config-register on ASR9910's RSPs? On ASR 9010, "show version" will display that. However the output on ASR9910 with 64 bit does not display the config register. Thanks
Scenario: I need to change the ttl of packets coming out of pppoe interfaces. Is there any option available in IOS XR?
Hi all, I have a problem with free space on disk0: on ASR9001. After deleting file, free space is the same: RP/0/RSP0/CPU0:#dir disk0:Sat Jun 2 21:36:41.353 CET Directory of disk0: 15322 -r-- 978940 Thu Jan 1 01:06:46 1970 .bitmap17 -r-- 565248 T...
Hi All, I am trying to build up a lab with couple of iosxrv ans nxos9000v. My first issue is that my bundle ethernet is not coming up between the xr platforms (I am using 2 interface), below is the config: RP/0/0/CPU0:Router-A-1#show run int giga...
Hello,Anybody met the same issues?We have a ASR9001, when we test the SFP+ port, After several days running , the SFP+ port 2 and port3 disabled self.The port is only disabled, but not err-disable.We can use command "shutdown" and "no shutdown" to re...
Hi, on an ASR9010 used as PE, we have a L2VPN for one client that is using PTP 1588v2 in ethernet mode (multicast destination mac-address) and it is not functional for him. We have no configuration for PTP on the router, should it not forward transpa...
Hi Everyone I got an error trying to establish a pppoe session to a BNG ASR9000, in the debug it seems that que client pppoe its sending a pppoe packet type 11a7 (PADT) to the BNG, just after the client receives a pppoe packet type 1165 (PADS). I j...
