Welcome to the Community!
The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally.
New Here? Click here to learn more and get started.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1934761members
1256684discussions

Community Activity

IPSec VPN Tunnel Lan-to-Lan decrypt count zero

Hi, I have one issue with IPSec tunnel Lan-to-Lan between ASA 5525x (v9.8) and ASA FPR 2110 (v9.16). My Tunnel is up but ping between each client was not successful. Both peer status sh cry isakmp sa in "MM_ACTIVE".I ran packet-tracer icmp between pe...

El Rondo by Level 1
  • 1062 Views
  • 35 replies
  • 0 Helpful votes

Traffic from sub-interface subnets failing to AWS

I have an ASR1001-x with a single 10G interface to a switch on the LAN. I cannot pass traffic from the sub interface subnets to AWS network connected on WAN. The Lan interface subnet 192.168.50.0/23 passes traffic correctly. the other two do not. Can...

jroy777 by Level 1
  • 71 Views
  • 1 replies
  • 0 Helpful votes

Does cisco announces VG320 and VG310 eol?

We recently got several VG320 and VG310 and just deployed but I see the link these hardware are expired.End-of-Sale and End-of-Life Announcement for the Cisco Voice Gateway VG320-EM and VG310-EMAre VG320-EM and VG320 are the same hardware and already...

Connection closed by foreign host

Work on a Mac for my lab exercise, I have followed all the instructions for an SSH connection, including configuring line VTY 0 4I have read all the posts on here and nothing seems to fix the error" connection closed by foreign host".     

Integrate AD in ISE and login to DNA Center with AD Account

Hello Community!Is there anyway that Active Directory should be integrated to ISE and AD User could login to DNA Center with the help of ISE?Because ISE is normally connected/integrated to DNAC and AD cannot be directly connected to DNAC. So how to l...

Resolved! Zombie Environment: "Terminate failed"

Hi,My most recent CML environment is in a zombie state and it can't be extended or ended.  No new environments can be launched.  How, if at all possible from my end, can i clear it?

kjfiorito by Level 1
  • 139 Views
  • 3 replies
  • 0 Helpful votes

To receive configuration change notifications from the WLC

I am currently facing challenges with configuring \ our Cisco Wireless LAN Controller (WLC). Our goal is to receive configuration change notifications from the WLC for monitoring and management purposes via an email. How can we achieve this?

manoharre by Level 1
  • 125 Views
  • 2 replies
  • 0 Helpful votes