Cisco Community

How to access ssh on Cisco Business CBW150AX ?

Dear all I have a new cbw150ax-s unk access point. I have set a captive portal and test AAA authen with external radius. All work fine but there is no accounting send to my radius server. So I need to access ssh to use terminal and enable radius acco...

DNA Center and NetFlow

Hello, Is it possible to use DNA Assurance to know Top N application/Ports/End points consuming the traffic ?

The operation took longer than expected.

I have just synchronized both Active Directory and Cisco ISE, ISE is using my server (AD) as an NTP server, everything is fine, but now I'm facing an issue "Status Summary: The operation took longer than expected. This may be caused by slow network c...

Cisco WSA log shows 503 status code

Hi we have 2 WSA out of which one WSA is showing 503 error for a specific Site. When i tried nslookup in WSA for that site it shows the server returned no data(in both WSA).But the site is working in one WSA but not in the other and after 15 mins the...

NTP and Syslog packets with specific IP Address

Hi All,I have a couple of C9300 L3 switches that are connecting to an ASA firewall. The NTP and the syslog server for the switches are located behind a firewall.When one of the switches request/send packets the gateway IP is the source address on the...

Please help us investigate Service "ipfib" (PID 12792)

We found N7K-C7010 line card module 3 reload and found logging as below. 2024 Apr 26 13:08:19 SNIPER-01 %SYSMGR-SLOT3-2-SERVICE_CRASHED: Service "nfp" (PID 1130) hasn't caught signal 11 (core will be saved).2024 Apr 26 13:08:20 SNIPER-01 %NFP-SLOT3...

ikev2 VPN tunnel trouble shooting help

Howdy Cisco Community!Need your help as fairly new trouble shooting site to site VPN connectivity.I am unable to establish VPN connectivity per information below.Site:1crypto ipsec ikev2 ipsec-proposal CSM_IP_1protocol esp encryption aes-256protocol ...

Max number of licenses available for Cisco ISE

I'm speaking of Essentials/Advantage/Premier. We use on-prem SSM.is there way to know how many licenses Cisco ISE gets from the binding to a virtual account on Cisco SSM?The only piece of information is the consumed ones, like knowing how many you ar...

Multicast Lab Auto-RP

Hi ALL,I have setup a lab in CML for testing multicast using Auto-RP but I cant see traffic flowing from the source to the receivers . I can see the (S,G) entry in the first hop router and the (*,G) entry in the RP .Appreciate any feedback Thanks,Fra...

After changing PPPOE max session , IPTV not connecting automatically A

Team,On this Te0/0/0.667 subinterface we have more than 200 users. so we set the PPPOE maximum session.After setting up PPPOE maximum session to 1000 , IPTV not connecting automatically and getting option SKIP or RETRY. after select skip IPTV getting...

Duo Auth Proxy Ldaps for vCenter

Do you have any idea on this?[ldap_server_auto]client=ad_clientikey=nnnnskey=nnnnapi_host=api-nnnn.duosecurity.comfailmode=securefactors=pushexempt_ou_1=Xexempt_primary_bind=falseAfter Enable I checked on port seeing certificate is work now. but I tr...

Webex Connect Email with Webex CC - RONA

Could anyone please guide me on how to meet a requirement for Webex CC email management? I've successfully configured the initial settings and can accept and send emails from the Webex CC agent desktop. Now, I'm attempting to display previous emails ...

WLC 9800-CL - help with correct interface/SVI configuration

Hello all, we are currently transitioning to a virtual 9800-CL WLC, hosted on a VMWare node on premise. The WLC and the FlexConnect APs are working correctly but I am experiencing a weird behavior with the interfaces. The APs are on VLAN 1 - 192.168...

Problem on CIsco SX20 shared with MS Teams

Good morning,Thank you in advance for your help.We have a room where we have installed a Cisco SX20 videoconferencing system with a Cisco Touch 10. The problem we are encountering is that when we are in a meeting, an external tries to share screen an...

copy xmodem initializing no transfer c2960

Hi Guys, i had this problem for 8 hours now and can't seem to get it cracked... after i input the command copy xmodem: flash:c2960-lanbasek9-mz.152-7.e9.binand using the SecureCRT going to Transfer > send xmodem I get this and after that nothing happ...

Congratulations to the Event Top Contributors Class of 2024!

Cisco + Splunk: It's a new day for your data.

Introducing Our New Gamification Ranking Naming

Community Activity