The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Hello,We are configuring virtual CSR8000 over AWS infrastructure, and have configured IPSec tunnel for voice traffic.Tunnel is configured with Public IP tied to physical interface, and RTP endpoint tied to Loopback interface. With this setup tunnel d...
[`Get Refund`]Can I get a refund on 핰햝햕햊행햎햆?Planning a trip can sometimes come with unexpected changes or unforeseen circumstances+1<>855<>718<>1238 헢헿 헧헼헹헹 헳헿헲헲 헻혂헺헯헲헿 ✈+ +1>855>718>1238. 핰햝햕햊행햎햆 understands this, which is why they offer a flexible ...
Planning a trip can sometimes come with unexpected changes or unforeseen circumstances+1<>855<>718<>1238 헢헿 헧헼헹헹 헳헿헲헲 헻혂헺헯헲헿 ✈+ +1^855^718^1238. 핰햝햕햊행햎햆 understands this, which is why they offer a flexible cancellation policy to accommodate traveler...
I set up OSPF between Cisco ACI N9K-C93180YC-EX switch and C9300-48U switch, but Neighbor state is maintained in INIT and will not be established. I will attach the setting screen as a capture screen. Can you tell me what the problem is? Two Nexus sw...
Hello Cisco community, i've got a weird problem. I have a server "A" connected to Gig2/0/18 as an access port (VLAN28) to my Catalyst C9300 switch. I can ping the device from the switch. The switch has an SVI configured for this vlan 28.I also have m...
The standard admin password for "IOS XE on Cat8kv AlwaysOn" (devnetsandboxiosxe.cisco.com) is not working. Can this environment please be reset to defaults?
Ive a pair of new UCS-FI-6536s and they are all set up and working fine in IMM but we cannot SSH to them as we did on the old FIs.They are on the same VLAN as the old FIs and there are no firewalls inbetween them.Does anyone know if this is even poss...
Hi Guys.We are running Firepower 3140 Appliances. There are 2 * 40Gbps connection. The Physical (ETH2/1) 40Gbps interface has the MTU set as 9000 whilst the Sub Interface (ETH2/1.10) and (ETH2/1.20) has the MTU still at 1500In this scenario,1. Is the...
I am currently on version 44.4.0.29432 and configured my Webex app Meeting Join Options to use my computer for audio as the default join options as seen in the screenshot below. But if I am connected to my desk phone (8875), using the connect to a de...
Hi anyone using radware as loadbalancer for wsa? Do we need to change anything in wsa side? We have given radware LB vip in the proxy settings of users but request is not reaching WSA.anyguide is available for the configurations.
Hello everyone,We would like to use our “old” C2960X devices, which we have in large numbers, to connect simple devices such as printers or PCs that do not require PoE. The goal is to use SGT for these devices. I have already read that it is not poss...
Hello all,Recently there is a request from my user to use a software "Sonobus" that can allow other users to join together to share their audio recording. This looks like to be the peer-to-peer UDP traffic. Sonobus I decided to go ahead for testing i...
I have a C9200L switch running IOS 17.6.5. I am looking for the Command Reference page for the interface-level configuration command "switchport vlan mapping". I have looked through the indices of serveral IOS-XE 17.x Command Reference guides, but ...
Hi All, let me first try to schematize our setup : O365 TENANT --> LINUX POSTFIX ( for sender based routing ) --> CISCO ESA ( DKIM signing )--> OUTSIDE WORLD When a mail is sent from one of our email domains in our O365 tenant ( and DKIM signing ...
Hello,I have cucm running under vmware using cisco ucsc-c240-m4s2.Current cucm version is 11 and nowi want to upgrade to version 12.When i try to order smartnet for ucsc-c240-m4s2 our distributor say this box already eol and eos. So here i need advic...