Trending Topics
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
-
Cisco ECE - PCCE 12.6.2 - O365 Troubleshooting - Special Characters
by browto2009 -
Cisco FTD 2100 capture DHCP packets on Client Nodes subnet, DHCP Relay
by red2play -
Multiple SSIDs connect to different VLANS using AIR-CAP3702I AAP
by siskum -
[100%~U,S]How to Get A Refund from 𝕰𝖝𝖕𝖊𝖉𝖎𝖆? 24*7 #Contact~me
by ameliaelsher96 -
Cisco ACI OSPF Neighbor Failer and INIT state
by 홍경택 -
Can anyone SSH to UCS-FI-6536 Fabric Interconnects
by Rosco. -
Firewpower 3140 - MTU on the Physical and Sub Interface
by AdrianKumar96345 -
Meeting join option settings defaulting to Cisco Phone
by Jesse D
Community Activity
[100%~U,S]How to Get A Refund from 𝕰𝖝𝖕𝖊𝖉𝖎𝖆? 24*7 #Contact~me
The best way to secure a refund from 핰햝햕햊행햎햆 is to reach out to their customer service team directly. By calling {1"888~816~4638 } or {1"888~816~4638 } (Real Person), you can speak to a representative who will guide you through the refund process and...
Cisco CSR8000 need help configuring RTP routing over established IPSEC
Hello,We are configuring virtual CSR8000 over AWS infrastructure, and have configured IPSec tunnel for voice traffic.Tunnel is configured with Public IP tied to physical interface, and RTP endpoint tied to Loopback interface. With this setup tunnel d...
Cisco ACI OSPF Neighbor Failer and INIT state
I set up OSPF between Cisco ACI N9K-C93180YC-EX switch and C9300-48U switch, but Neighbor state is maintained in INIT and will not be established. I will attach the setting screen as a capture screen. Can you tell me what the problem is? Two Nexus sw...
Ping runs on switch directly but not from a device connected to switch
Hello Cisco community, i've got a weird problem. I have a server "A" connected to Gig2/0/18 as an access port (VLAN28) to my Catalyst C9300 switch. I can ping the device from the switch. The switch has an SVI configured for this vlan 28.I also have m...
Resolved! Always On IOSXE Sandbox Password Reset
The standard admin password for "IOS XE on Cat8kv AlwaysOn" (devnetsandboxiosxe.cisco.com) is not working. Can this environment please be reset to defaults?
Can anyone SSH to UCS-FI-6536 Fabric Interconnects
Ive a pair of new UCS-FI-6536s and they are all set up and working fine in IMM but we cannot SSH to them as we did on the old FIs.They are on the same VLAN as the old FIs and there are no firewalls inbetween them.Does anyone know if this is even poss...
Firewpower 3140 - MTU on the Physical and Sub Interface
Hi Guys.We are running Firepower 3140 Appliances. There are 2 * 40Gbps connection. The Physical (ETH2/1) 40Gbps interface has the MTU set as 9000 whilst the Sub Interface (ETH2/1.10) and (ETH2/1.20) has the MTU still at 1500In this scenario,1. Is the...
Meeting join option settings defaulting to Cisco Phone
I am currently on version 44.4.0.29432 and configured my Webex app Meeting Join Options to use my computer for audio as the default join options as seen in the screenshot below. But if I am connected to my desk phone (8875), using the connect to a de...
Wsa with radware load balancer
Hi anyone using radware as loadbalancer for wsa? Do we need to change anything in wsa side? We have given radware LB vip in the proxy settings of users but request is not reaching WSA.anyguide is available for the configurations.
SXP between C9300 and C2960X
Hello everyone,We would like to use our “old” C2960X devices, which we have in large numbers, to connect simple devices such as printers or PCs that do not require PoE. The goal is to use SGT for these devices. I have already read that it is not poss...
Peer to Peer traffic through ASA 5516
Hello all,Recently there is a request from my user to use a software "Sonobus" that can allow other users to join together to share their audio recording. This looks like to be the peer-to-peer UDP traffic. Sonobus I decided to go ahead for testing i...
IOS-XE 17.6.x Command Reference for command "switchport vlan mapping"?
I have a C9200L switch running IOS 17.6.5. I am looking for the Command Reference page for the interface-level configuration command "switchport vlan mapping". I have looked through the indices of serveral IOS-XE 17.x Command Reference guides, but ...
DKIM Fail when receiver is O365 customer
Hi All, let me first try to schematize our setup : O365 TENANT --> LINUX POSTFIX ( for sender based routing ) --> CISCO ESA ( DKIM signing )--> OUTSIDE WORLD When a mail is sent from one of our email domains in our O365 tenant ( and DKIM signing ...
Cucm upgrade
Hello,I have cucm running under vmware using cisco ucsc-c240-m4s2.Current cucm version is 11 and nowi want to upgrade to version 12.When i try to order smartnet for ucsc-c240-m4s2 our distributor say this box already eol and eos. So here i need advic...
Device Profiling for Bank ATM Machines
Hi All, Has anyone tried device profiling for Bank ATM Machines? ATM Machines generally run Windows Server OS, which Cisco Secure Client does not support. For ATM Machine Authentication, we can use MAB; however, to avoid the risk of MAC Address Spo...
