The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
I am taking the self paced course for ECMS-1. However, the pre-recorded class requires us to follow along as the instructor add devices, etc. Where does a student go to get access to devices so we can follow the class?
Hi All! I have one problem related to running GuestShell on Nexus 9000 I managed to successfully run guestshell and install iperf3. But when i start measuring channel bandwidth, it shows tiny values, the hundreds of kilobytes, while the real channel ...
Situation:-Server Will have a private IP natted with a public IP from firewallFirewall outside interface will have a public IP of same poolAll incoming traffic on outside interface from internet will be blocked on firewall and only Client IP address ...
Hello,We have Catalyst 9100AX series APs. We want to convert one of them to EWC. We tried to factoy reset both however after the reset they are still act like CAPWAP and stuck at CAPWAP States.P.S. We have WLCs in our network but we isolated the VLA...
Hi,I tried to launch sandbox few weeks back,then I tried to launch IOS XE on Cat8kv,which opened for me after couple of attempts.Again I tried to launch it but I couldn't,because the launch button is disabled as it reached maximim no,of connections t...
Hello all,I made a network for a college project in packet tracer and everything should work i think... But i cant get my laptops connected to the dhcp server and get the APIPA is being used error. I dont know what to do anymore. It has to be DHCP an...
I currently have a Python function that will grab an endpoint's last wireless connection using Prime's API. The issue I'm running into is the client-detail API call will only give inactive connection info for about 24 hours before. Does anybody know ...
Hello everyone,We have the NCS55A1 router. We tried upgrading with ncs5500-goldenk9-x-7.6.2-SPGISO0001.iso from the IOS-XR 7.4.2 version, but the replacement failed with an "Internal error" message. After that failure, we performed the upgrade with N...
Hi. I am most of the way through implementing an ASA 5508-x, controlled by a vFMC. Both are running 6.2.2.0 of the FTD and FMC software. Since the configuration is quite complex, and I would hate to have to do it all again from scratch, I figured...
Hi All, I am currently tyring to updage ACS 5.7 with patch4 to ISE 3.X and the traget location for ISE 3.X is Azure Cloud. Have not seen any upgrade guides and things to consider to perform this upgrade.So if someone who has done this can shed some l...
HiI have created the VTI Interface for this but when I run packet tracer input the VTI I nterface is not in the list of available interfaces to use in packet tracer.??Any ideas anyone Thanks
If a router has both MPLS and Internet Color, by default it is understood that the traffic should be distributed between MPLS and Internet, is this correct?Looking at Traffic on the interface from vManage, it appears that only MPLS is being used.Both...
Hi, One of the our client want to use Different make WAN router (not cisco) for WAN connectivity. At the same time, they wanted the backup call manager option for their cisco phones. Can we use SRST router somewhere middle of the network without any ...
hi,is it possible to configure two vpc peer-link (port-channel trunk) between two N9K?i.e. port-channel 1 would be a temporary trunk and uses MM fiber cable and port-channel 2 would be the 40GBASE-CR4 pre-fab direct cable.the 40GBASE-CR4 would arrive...
Hello, I have deployed EWC and around 20 AP are joined to the EWC. There was a scenario where there was a power outage. Post the power issue was resolved, All the Aps but three have re-joined the EWC. Those three Aps were showing on the switch , but ...