The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
So basically I have this problem I have setted policies for Dot1x and MAB on both Cisco IOL L3 (version 15) and Cisco ISE (RADIUS Server) but client do authentificate only with the default method which is MAB (I did set an order for methods on Switch...
I learning how to set-up firewall and came accross such a problem when trying to connect through web-browser to DMZSERV : 3. The packet is coming from an outside network. The device looks up its NAT table for necessary translations. 4. The packet is ...
NSO 5.7From our recent HA operation, we are seeing 2 different be-slave-result. Would like to know what's the different between them. Thanks!high-availability status be-slave-result initializedhigh-availability status be-slave-result connected
Hello,"The SD-WAN Viptela spoke has two connections: one for DSL primary and the other for cellular secondary. However, it consistently routes traffic through the cellular connection only. I need to redirect this traffic to the primary DSL connection...
Work on a Mac for my lab exercise, I have followed all the instructions for an SSH connection, including configuring line VTY 0 4I have read all the posts on here and nothing seems to fix the error" connection closed by foreign host".
Trying to authenticate I have this error as shown, can anyone help me!*May 11 12:38:20.482: %RADIUS-4-RADIUS_DEAD: RADIUS server 192.168.100.3:1812,18 13 is not responding.*May 11 12:38:20.482: %RADIUS-4-RADIUS_ALIVE: RADIUS server 192.168.100.3:1812...
HelloAfter I have setted every policy on the switch and everything is working fine through an ISE authentification via dot1x, now server cannot reach its gateway in order to give IP DHCP addresses to the hosts on VLANs!Can anyone help me please
Any document related to machine authentications using ISE in meraki wifi infra for the corporate devices. I got to configure using user authentications. searched many forums for the same. can anyone point it to correct documentaions or link to config...
8.8:2802 AP console "DTLS disconnect: ERROR shutting down DTLS connection ..."CSCvj27233 i have this problem on my AIR-AP3802i-H-k9 when i want to connect it with my "5508" WLC
Hello All, I have a question, I built the following DHCP pool and ACL on the Cisco core. When the ACL is on the computer doesn't able to get IP address from DHCP but when I turn off the ACL it works perfectly fine. So here is the question when comput...
I have a Cisco 3700 Series AP and trying to connect it to a WLC 5508. I have getting a certificate validation failed error, however when I use the command "show crypto pki certificates" no such expired certificate shows up. Previously had an issue wi...
Do you know how to display via SNMP if PortFast is configured on a given port?Is this even possible?We are building an application that is supposed to work optimally so we are testing simple port configurations via SNMP such as setting VLANs, IPs, ma...
Good morning I am facing the following problem on a customer location with main and backup router. cisco ISR4331/K9 We see constant incoming IHQ packets on the WAN Interfaces on both routers. At the same time there is almost no traffic on the WAN Int...
Hi, I'm looking to get some assistance or guidance on this old phone system. Looking to see if there's any 3rd party vendor that is willing to help troubleshoot some issues. Cisco Unity Connection version 8.5.1ES65.13900-65Cisco Unified CM Administra...