IP Telephony and Phones

For SCCP IP phone we can create  Corporate Directory as below: telephony-serviceservice dnis dir-lookupdirectory entry 1 5550341 name doctor1directory entry 2 5550772 name doctor1directory entry 3 5550263 name doctor3! We have CME setup for 50 user, ...

Hello, I have been asked to provide a monthly CSV report for long-distance call usage, with each row to include at least: A user's nameUserID or extensionDepartmentDuration of LD calls for time period (month) Unless I am missing something, CAR is not...

Hi, Our SIP link pilot number is 0114 XXX XXX . We have configured DID 0114 XXX XXY for 1111 number. Incoming calls are coming to 0114 XXX XXY number is directly going to 1111. Can I configure 1111 outgoing calls going through 0114 XXX XXY? Regards, ...

Dear All, I have cisco Call manager and couple of Cisco IP Phone registered on them. However i need experts advise how to capture the sip traces or any command may be in UDP or whatever format which can confirm me how many digits for Dialed number i...

Can anyone recommend a cost effective way to implement SIP VOIP redundancy at remote sites? We have cube routers in our DC that handle all our SIP traffic for our Corp office and 200 + remote sites, however if a remote lost their mpls connection they...

I have a 2901 router setup as an h323 gateway for 4 fxo lines.  The problem is only 1 call can be placed at a time (inbound or outbound).  the second call seems to rings the other end once and but will not let you answer.  What would cause a router t...

Dear All,  I am facing an issue with wireless 7925 phones. we are getting high packet loss while making internal calls from wireless 7925 phones to other phones connected in LAN. It causing voice clarity issues. calls between the phones connected in...

Dear Team , How to upload .wav file in unity connection for IVR. Regards,

Am trying to convert environment to T.38 faxing with passthrough as a fallback. One sticking point is an internal fax server solution, connected via a T1 crossover cable (Cisco 3845 router <-T1-> Windows Net Satisfaxtion Server). The problem I have i...

HI All Thanks in Advance !!!! I have a query. I have a user in my environment, lets say his name is Andrew Joseph and his user ID is aj1234. Now my query is, when I see him in Resources section in UCCX, his name appeared as Andrew Joseph, but when...

We have a situation where we're connecting a user directly to a routed interface on a Cisco 2921 and the user has also requested a Cisco VoIP phone. Normally you would put the VoIP phone on a switch and set the switch port up for both Voice and data ...

Hi Mates, Does Call Manager have a command or option to print out all phones extensions for each mate's line and add on shared lines on each phone? cheers, Matt 

We are running a call manager 10.5 system. The  location in question has 3 pots lines with a cisco 2901 as a MGCP gateway. caller ID is checked in the config for the ports. but when a call comes in all it displays on the phone is a 0.  the provider t...