Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello Cisco Team,My customer is looking for an option in the cisco IP phones, which is saving 'missed calls' to his personal directory. Is it possible? If yes, can you please refer some guide to follow.ThanksGinesh
Hello friends from Cisco Support Community,i'm verry happy from your posts and first i want to tell you a big THANKS! Now let's start with the questions I don't know if you can help me but - i have a phone 6921 and a Cisco Roter 3945 ... If i unders...
can anyone help?we have used a SPA3000 which has 2 sockets (Line & Phone)the Phone socket is T.38 compatible however the Line socket is not.We have a PBX that is hard coded with T.38.So im looking for a Analog Telephone Adapter where both the "Line" ...
Hi All,Sorry, if my english is bad.I have some questions. Can i set my number to "unknow number"?Senario : I call to mobile from IP Phone in my office and management by CUCM version 7. I need to show in my mobile to unknow number(Do not want to show ...
Could multiple "attempt transfer--result fast--busy" be the result of a MTP failure?our error logs are showing "resource not available" but it is not telling us what resource.
Originally posted: 2013-Oct-03.More than two years ago, I informed Cisco that various pieces of documentation detailing the GB number plan were inaccurate, incomplete, and out of date.The majority of the published data seemed to be from some time bac...
voice service voip sip silent discard-untrustedSilent discard was added in 15.3.3M to make the router not send 403 errors to untrusted entities...which exposes the router (validates that it's there essentially).Might want to add that whe...
I want to upgrade my host to ESXi 5.1 (from 4.1) but I have not found the upgrade on Cisco's site. Am I supposed to get the Cisco branded ESXi 5.1 iso from VMware? And is there a difference if my hosts are running my CUCM phone system?My hosts are cu...
This started out as a firewall issue. I had reports that a remote site (connected to HQ by VPN) was having to reboot their firewall at least once per day because they were losing connectivity. After looking at the ASA 5505's connections table (show...
System version: 8.6.2.22900-9VMware Installation: 1 vCPU Intel(R) Xeon(R) CPU E5-2609 0 @ 2.40GHz, disk 1: 80Gbytes, 4096Mbytes RAMA few month ago we had a vendor come in and upgrade our old VOIP system with a VMware solution of Call Manager. Version...
Hello Everyone,I am running into an issue with configuring 7962 connecting to Call Manager over VPN Connection. I get VPN Authentication Failed with "All Concentrators Failed" error in Status messages.. Please look at the following config on ASA:cryp...
What exactly does mgcp fxr-package do on an MGCP gateway?I've seen mention that it's needed when using T.38, but we're not using T.38 for faxes.Thanks,GTG
HiWe need to disable ethernet auto-negotiation in about 1000 IP Phones, because many PCs that will be connected to them fail to properly auto-negotiate (old ethernet cards). We will configure them as 100Mbps/Full Duplex.The problem: We don´t find an...
Hello,I was wondering if would be possible to change for multiple users the policy to "do not expire" the PIN for users with mailbox under Edit Password Settings (Voice Mail).I tried looking on BAT in CUC, but I did not find a way to do that. Not sur...
I am upgrading from 9.1(1a) to 9.1(2) and as I was reading the upgrade guide it states "You cannot install upgrade software on your node while the system continues to operate". I have always been able to stage standard upgrades on the inactive parti...
