Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
When a user connects via Cisco VPN Anyconnect starts up the CIPC client, they receive an error, 'TFTP server can not be reached'. We can workaround this issue by opening a 'run as administrator' session and manually entering the address and the clien...
has anyome seen this mesage. could not remount localstore when tryiing to reload a Unity express on a 2911 15.2.2.t1 cue 8.6.1ISM with SRE for Unity
What is the least interruptive way to restart Cisco Unity Connection Rls 8.6. If possible I would like to be able to maintain voice mail operations on publisher, while restarting the subscriber, then switch and restart the publisher. The restart is e...
Hi All, Can you please confirm how can we check the call information -- Tx . Rx packets in a 7931 phone -- did not seem to find any details for the same. Actually have a one-way audio isssue on a couple of 7931 phones , so need to troubleshoot it acc...
When I enter an IP address of a registered Cisco IP phone in the web browser, I cannot access any phone (7960 or 7962). The error says: "INTERNET EXPLORER CANNOT DISPLAY THE WEB PAGE". The web page access for the phone is enabled under DEVICE-PHONE. ...
Is there a way to remove the self-view button, or move it to the end of the line, while keeping the camera enabled? I do not see it in feature control policy.CUCM 9.1.2 and firmware 9-3-2-10
I have a CUCM cluster in the US and another in the EU running CUCM 8.5.1 and 8.6.2 respectively. I have built a SIP trunk on both ends and I can make calls from the US cluster to the EU cluster, but not the EU to the US. I have run DNA on both clus...
Hello all,We have a Unity Express integrated with CUCM, and soon will upgraded to version 9. Hence we are going to upgrade our CUE from 7.0 to 8.6.we are going to upgrade our CUE license also.My question is, can i do 'software install upgrade' option...
Hello,Our Unity connection constantly communicating with an external IP address (tcp/2000), from the CUC wireshark logs i could see that this is happening every 1 second. I have checked apps logs and connection manager logs but couldn’t find this IP ...
Hi, we have a BE6K setup with CUCM v9.1, IM & Presence V9.1 and Enterprice license manager (ELM) v9.1. Does CFS require additional enhanced license ? After adding CFS we are getting "Insufficient license" error. Is CFS not considered as a device whic...
I have a CIPC connected to CUCM 8.6.2a, I have tried the latest ES CIPC code as well as latest CIPC code, What happens is the phone reigisters soon as you dial the cipc restarts. Hit vmail button cipc restartsTo get it back I need to chage id then c...
We are having an issue where our presence is always off on Jabber. We are integrated with Outlook 2010 but when users are in a meeting and are using their laptop their indicator is always green. Is this the way it is supposed to work or is there so...
Hi Folks,we want to have 2 phones ringing at the same time if a call comes in to a specific external number of our CME, so i configured a hunt-group and an according translation rule for the incoming calls:rule 1 /123456789/ /901/voice hunt-group 1 p...
Does anyone know if the latest version of Cisco Unfied Communications Manager (R9?) can have a direct link to the Micrsoft mediation servers for Lync 2013? For example, could you build SIP lnk/trunks in UCM that talks directly to the mediation serve...
Hello guys!I am getting the following error when trying to add a BE6000 into Vcenter:The host is licensed with VMware vSphere 5 Hypervisor. The license edition of vCenter Server does not support VMware vSphere 5 Hypervisor. I have ...
