Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,I have some doubts regarding CME redundancy and i don't found answer reading the guides.1- Should i configure the second CME router (Backup) with SRST configuration (callmanager- fallback) or config like a CME (telephony-service)?2-Should Hardwa...
I have 2 questions regarding Music On Hold options for CME 9.01) Can you use unicast or is multicast the only option on CME 9.0?2) On a L3 3750 switch running IP BASE, is it possible to deliver MOH on the Voice VLAN (SVI) utilizing PIM STUB routing?H...
HiI have the following setup CUCM 6 -- > H323 GW ---- > SIP from same GW ---- > SIP providerWHen i dial a number across the SIP provider the number rings ,but as soon as i answer the call the call gets dropped ,but from the SIP debugs on the gateway ...
Hi, I would like to roll back to an older version of firmware - SCCP 9.2.1.0 (Active Load) to SCCP 9.0.2.0 (Inactive Load)We are using CUCM 7.3.1Tried to manually assign the Phone Load Name on the device to "SCCP69xx.9-0-2-0" [device][phone][ext][pho...
I have Cisco Unified Communication Manager Cluster( version: 8.6.2.2000-2).I will add a new subscriber to existing cluster. I have : a new 8.5. instaliation dvd , 8.6.2.2000-2 upgrade dvd.is it possible to add the new subscriber to cluster. or is it ...
Hello Folks,I am almost done with an Avaya S8400 and Cisco CallManager 5.1 integration using H.323 trunk. The only issue I have is the Caller ID & Name from Avaya to Cisco. The display shows "Unknown unmber". The Avaya users are able to see the Calle...
Hi, what are the requirements in order to purchase off of the VG224-MP part number? Also, is there a 4 port T1 card coming out? Thanks
voice translation-rule 1rule 1 /^9/ //voice translation-profile 1translate called 1
Hi guysI'm with a big problem in my customerThe customer associate users (from LDAP) in owner ID (field) in the phones devices.Well, sometimes (all weeks), employees are, how can I say, they take a "job-licensed" (sick, accident at work and another c...
Hello,Was anybody solved this problem?http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCto3125669XX phones have 10 min TFTP DL timeout. Upgrade fails over WAN. Symptom:69XX model phones (6921, 6941, 6...
Hello,I had our telco company install a single PRI last summer. The PRI feeds 5 locations, all of whom we disconnected their analog lines and they now ride on our PRI line at Location A. I needed to setup 911 so that when calls originate from any of ...
Hi All, Seems to be a bad day with all sort of issues we have specific lines for our vice president (s) at our org, what exactly is happening is that intermittently for some of them , the roll over lines ( line 2..line..3 of the same directory numb...
Hello guys, does anyone have the release document for Unity Connection Version 7.1.5ES7.10000-7. I am trying to find out which bugs are fixed in this Engineering special. Cheers guys.
I am having a problem with a Hunt Group configuration I am running CUCM 8.5 with Unity Connection 8.5Forward Hunt No Answer is set to the Unity voicemail pilotForward Hunt Busy is set to the Unity voicemail pilotIn both the above scenarios,...
Hi,I have proposed 3905 IP phones to a customer along with CP-3905-PWR-IN= power adapter.I want to know whether CP-3905-PWR-IN= is a 2 pin power adapter or is it 3 pin power adapter?I searched the data sheets as well as administration guides but this...
