Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
hi,i'm testing CME 8.6 and CME 9.0 with SCCP on my local LAN, no external calls possible (POTS, SIP, etc)my config:telephony-servicemoh music-on-hold.authe file music-on-hold.au is located in the root of the flash:what i not have configured is this c...
Hi all,I have added one sip extension on cme. Whenever i dial outsdieby dialing 9, it omits digit 9 and finally i cant recall that number. any Clue?
Whats the difference betweendial-peer voice 1 pots incoming called-number . direct-inward-dialanddial-peer voice 1 pots incoming called-number . direct-inward-dial 2...My extension are starting from 2100 to 2199 and DID are starting from 700 to 999. ...
Hi,We using Cisco 2801 ISR router with UCME 8.6. We try to use Turkish locale on IP phones configuring this router but we can't success. I installed it under telephony-service using command below but it didn't work. The file copied in its directory.I...
Hello,I have a customer has a Cisco gateway connected to ITSP SIP Circuit .He need to add another redundant gateway so that if the primary gateway is down, Call will be handled through the backup gateway. There is only one SIP Circuit on one of the g...
Hi,When installing DMA 6.0.1 on a 4.1.3 callmanager it fails with the following error (from log file)10/21/2007 01:27:33.217 DMASetup.cpp fnRunCommand CreateProcess returned: 1603 10/21/2007 01:27:33.217 DMASetup.cpp fnRunCommand Function ended 10/21...
My customer already ordered the new server (MCS7835I3-K9-CMD3A) for running Call Manager v8.6.In the existing environment, the Call Manager is running version 5.1.2.3000.002.I will use the new server to replace the existing server.However, may I know...
Greetings!We're going through an upgrade from 4.1 to 8.5 Call manager.In 4.1 there was a function called Global Directory.In 8.5 it looks like it's been replaced with LDAP Directory.Ideally we would like to have a web page we can send external users...
Hi,Ive been looking on the internet about the Cisco CUCM but i couldnt find a good article. My main qeustion is do you have to buy it? Or can you just download it for free? (probably not) I am familiar with asterisk PBX. Does the cisco cucm differs a...
Hi,I have 7921Gs connected to UC540 in addition to other phones. Problem is that at some times the 7921Gs suddenly disappear from the topology in the CCA but they continue to function properly. Moreover rest of the phones don't have such problems. To...
Hi,We are configuring CME with a SIP trunk to a SIP provider.We noticed that all pots dial-peers and the extensions want to register them self.We disabled that with the "no-reg both" on the DN's and "no sip-register" on the dial peers.We still have t...
I have one 2911 gateway that has been tied with the cucm 8.0 server with the MGCP gateway.2911 has 3 VWIC cards . I have now PRI line from pstn. Then somebody tell me is there any need to configure VWIC card that is now showing in the CUCM. And if th...
Hi,We have CUCM (v 7.1.5) connected to a SIP provider using a SIP trunk. The sip provider only accepts G729, so I created a new Region and Device Pool to use G729 as the audio codec and assigned the SIP trunck to it.Also I am using MTP in the SIP tr...
Hi,We have implemented FAC, currently when we re dial the number the FAC dialled for earlier call gets displayed on the Analog phones.Analog phones are connnected on VG224 and the CUCM version is 8.6.Is there any way where in we can suppress the disp...
Can someone please help? I am having difficulties populating my end user database in CUCM 7.1 with AD accounts that I want. Here is my dilemma.I can configure my LDAP Directory settings within CUCM 7.1 with the follow LDAP User Search Base...DC=COMPA...
