Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
hi ,i have a 2911 t1 using mgcp on call manager 8.6.2. dms-100 is the switch type between this gw adn the nortel pbx 61c. internally calling from cisco to pbx or vise versa not working correctly. one thing to note here is that 2911 is the network ...
Hi, Can anyone help me please with the VoIP Unlimited (UK SIP provider) XML template to add it to the CCA.
Hi, Can anyone help me please with the VoIP Unlimited (UK SIP provider) XML template to add it to the CCA.Sent from Cisco Technical Support iPad App
Hi,When i try to do sip registration on certain ios versions, the registration fails becasue the authirzation header is never passed in to the sip server. When i do look at the sip messages in debug i see this. Some of the ios version i have problem ...
I finally have my first VG204 registared with my Call Manager 6.1.5. Howeveer no when i go off hook i get a busy tone and my VG says. dial per not found. .... using sccp. WTHAny ideas?
Hi,im trying to make calls on my 3700 router with 12.4(25d). I can register into my sip provider but when i call into the router with my external DID, i get this error in my debug cccsip message: 400 Bad Request - Invalid Host. I searched for this e...
Hola, buen dia.Me gustaría saber el motivo por el cual, el mismo tipo de telefono ip(7945), me consume diferente potencia(6.3 w o 12 w).SW3560#sh power inlineAvailable:370.0(w) Used:351.3(w) Remaining:18.7(w)Interface Admin Oper Power De...
HiCisco Unity Connection has the RSS feed, which gives option for reading Voicemails using RSS Reader. However, when we try using it, the messages open in Windows media Player, and does not play the message.Has anyone tried accessign voicemails using...
Hi,I have been asked to replace a feature which existed in a legacy phone system. This feature enabled the user to block sending the external CLI by pressing button on their handset then dialling the requested number. The call flow is CUCM 7.1 > > H3...
Hi Folks,I want to set up a small proof of concept IP-PBX system for R&D purposes. Specifically, I'm aiming to setup a mini Cisco PBX, and configure one of the extensions to be an IVR, calling onto our own custom dynamically-JSP-generated VXML applic...
Hi,CIPC on my Win 7 laptop will play the ringing tone when dialled but get no audio.Any clues?Rich
Hi,I have been using mobility for the last year or so with one remote destination configured. I have tried to add a second remote destination to my profile and use the ring schedule. When I try to ring the new destination, the call fails. However if ...
Hello,we would like to make a "SIP Trunk Dial-Peer Configuration for Cisco CallManager Server Redundancy".That is, we would like to get in SIP what can be obtained with H.323, as in the document "H.323 Gateway Dial-Peer Configuration for Cisco CallMa...
Hello Everyone,Could someone help me ASAP as I am running out a critical problem.The voice mail recieved are showing incorrect time. For eg. if someone leaves a voice message at 10.17 AM, the system is prompting as the voice mail has been left at 10:...
Hello,I am struggling to setup an E1 R2 connection from Telmex in Mexico on a 2921 CME router. I have already tried the config found on cisco.com as well as many variant I found on several forums/web site. This E1 is a new connection in a new locatio...
