Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
My requirement as follows, in CUCM 7.1 , Suppose the busy trigger option is 2 by default. When a phone is already in call, and the second call is made from another phone, the caller hears ringing instead of beep sound. So the caller thinks, the user...
In a customer setup CUCM 7.1 end users is integrated with AD, when customer needs to login IP Telephony service, the userid is very lengthy and find difficult, they are requesting that we will create new field in AD as employ code, let the ccum take ...
In CUCM 7.1 setup do it possible to lock/unlock ip phone without third party software, myself suggest a solution for lock/unlock with extension mobility, do please suggest the various workaround for lock/unlock the IP Phone
With H323 you configure clock sources via Network-clock....... and then the priority etcnetwork-clock-participate slot 1network-clock-participate slot 2network-clock-select 1 E1 1/0network-clock-select 2 E1 2/0If you have more then one E1 from the sa...
Good day all,I face a problem with the incoming calls.I have 4 isdn lines.1 isdn number is 1812 isdn number is 0303 msn 1 --> 472 msn 2--> 0064 isdn DDI 540-9 (it isn't in use yet)1st problemOur customer would like to make 2 groups for the corlist in...
Hello AllI have a problem with Cisco call manager version 4.3 while I am trying to connect via AXLit reply with with "<h1>Bad Request (Invalid Verb)</h1>"Really Don't know why als I don't find the document for taht regard...
Hello allCan I use IP phones once I have terminated analogue lines into a VG224 from my UC500 paltform?Thanks
The Customer have three number 7011, 7012, 7013 when 7011 busy it will forward to 7012, when 7012 is busy it will forward to 7013, when 7013 is busy or not picking up the call it is going to voice mail, the customer needs the DN 7013 should forward ...
Here's a quick question thats been bothering me.What happens when the VoIP valn meets the Distribution layer and needs to access switches that are in a different switch block in a different part of the campus? The CCNP book strongly advises that vlan...
Hello everyone,Recently we installed a Communications Manager cluster in order to offer a call processing for about 600 remote branches.Each branch will have a router with SRST to allow users to make calls even if the MPLS link that connects to the c...
Is there a way to have a 10 digit number on the User in Active Directory and only pull the last 4 for the Global Directory and Attendant Console in UC 6.x?
Hello,Considering a remote site with a 2801 router and a FXS port on it... could the following be possible?1. Have the router registered as MGCP gateway so we can configure the FXS port as POTS and restrict calls with a FAC.2. Configure the port dire...
On 7962 SCCP phones with CUCM 6.1.5 we have problem transfering call. The transfer button don't transfer call, we need press it some times (3-5) to transfer call.What problem may be? Thanks.
We got request from a user.The user needs to access deleted messages. when we check the TUI we only have options to delete the messages items.We are using voice mail only setup, not unified messaging.Please let me know if this is possible in Unity or...
HelloAfter upgrade from UCM 5.x to 7.X the below scenariosPhone A with CFNA to Phone BPhone B with CFNA to Phone AWorks fine, but whenPhone A CFA to Phone BPhone B CFNA to Phone AThe CFA not works and cause loop calls.In UCM 5 and 6, on our labs, the...
