Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I need to setup a 7911 IP Phone by our front door so when the reception is out and the front door is locked visitors can pick up the phone and dial one of two extensions to reach somebody to let them in. Is this possible? I am using Call Manager 6.0....
Is there a way to use <number> AbbrDial with CME 7.1 ? I notice the phones have a Softkey for AbbrDial, but where/how does it get programmed? A search of the CME Administration Guide.pdf for AbbrDial gets no results. I did find in http://routerip/ccm...
Dear all,When any IP phone user forword all his calls to his mobile he just press CFwdALL button and type his mobile number from phone set.If this user has CSS with a code, no call forword will be done, and if i adjust it for him from CCM interface t...
I have a two server call manager cluster. I have my router with PRI setup with two dialpeer's, the first one sends calls to the publisher and the second one sends calls to the subscriber.This morning we took the publisher down to test failover to th...
Hi All;How can I debug (to see if the call coming) to the voice gateway at its E1, but it has 5 E1s? Actually what I need to do is to know if an incoming call to the number 23451518 (DID is 1518) was reached or not?When we try to call from any PSTN o...
I have create a route group to include two H.323 gateway (3845 router) for redundancy.The CUCM version is 5.1.G1 and G2 added in the route group with "TopDown" distribution algorithm. When i dial outgoing call, it would go through the G1.I have perfo...
Using CM 6.1.2 I have a 7921 phone and 7945 phone configured to use the same static phone number.The phones both ring when someone rings the associated extension number, trouble is when the call is answered on the 7945 phone the 7921 continues to rin...
Hi, I have 2821 CME at remote location and Cisco UCM at Main location. I need dial peer/SIP trunking over MPLS WAN connection configuration example for this.. DO any have it? Please suggest any related soultion or exmaple link.ThanksSandip
Hi team,I have configured CUCM 6 for vmprofile(voice mail pilot 9000) and associate with ip phone.(configured, Vmail ports(6), line group, hunt list, hunt pilot, voicemail pilot and voice mail profile)On unity connection 6, under telephony integratio...
Hi , I have IP communicator client version 7.0 installed on Laptop.And CUCM 7.0 in the setup. Communicator does not show extension on line button .It displays only time and Date.However it is showing registered in CUCM. Can anybody please help....
Hi Guys,I'm running CCM 7 with VG224's setup as mgcp.All my analogue DECT phones are hanging of the VG224'sThe issue that we are experiencing now is that we can't forward or transfer calls from any of these handsetsI know this is a limitation of a V...
Hi,I need some design help to create a custom phone app for a 7931.The requirements are:Have a 7931 button that toggles a feature on/off. The feature polls and performs an HTTP POST every 30 seconds when it's on. The feature stops polling when it's t...
Hi All,We are using Call Manager version 7.1.3.10000-11. The problem which we faing is that for any extension when we fetch CDRs , we get the reports but some information is missing. That is if the user has made outgoing calls for 10 times , we get r...
hiam faced with a strange problem with callmanager GUI. i have a callmanager 6.0. there is no problem with the login of callmanager, whenever i want to edit any phone gateway, route pattern., etc..for ex:., i click on Device---->Phone---->it gives me...
HiI installed the Cisco TSP on a Win2003 Server. The TSP ist not able to authenticate on the callamanger 7.0.2. I get the error message "Directory login failed - timeout" in the log.The user configuration and the permissons on the callmanager are cor...
