Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Does anyone see a problem with terminating a SIP connection (PSTN), PRI(PSTN) and FXS in a 2851 router?I know it's a broad question, but any thoughts would be great.
Dear Folks,I have configured my 2821 Router as MGCP gateway.I can make outgoing calls smoothly but not working incoming calls.I have congihured Attendant DN and all correctly.When i dial my Analog line number i am getting two times ringback tone and ...
Hello,My company is interested in purchasing a Cisco IP phone system. We currently have a Nortel PBX with about 100 Nortel 2616 phones.My question, is there an adapter or interface that will allow a Nortel 2616 phone to be used with a Cisco IP phone ...
Hello,Does anyone know of a way to set up Call Manager 5.0 to allow people to dial in and input a number to forward all their calls to instead of having to hit the web page or do it from the phone? They would like to be able to do this so in times o...
Can I run the .exe file of a new phones firmware on Callmanager during production? Is there a reload required with this firmware install?
Hi, need your expertise to configure my VG224 and integrate with my callmanager 4.2.I really appreciate your outputs and suggestions.Thanks.
Can someone help me understand what the part numbers are for smartnet software upgrades? I believe the call manager upgrade coverage is indicated with the K9 in the line and the Unity is a little easier to identify, it indicates the upgrade as =1, w...
My one location has route patterns out of which one is local,long, internationalWwhen I make 7 digit local calls, it is not using local rp but using long distance inspite of the fact, device CSS has local partition in priority first than long distanc...
I have a Single Primary CUCM in production. I added another CUCM as a Secondary to the cluster. I never fully got the second CUCM licensed and configured. I removed the second CUCM from the cluster (deleted the server entry on the CM admin site) and ...
Hello all,I am trying to configure outbound dialing for an office in Beijing China and here is my dilemma. There are 11-digit and 12-digit long distance dialings in China and current I have configured a route pattern of 9.xxxxxxxxxxxx to handle both ...
Hi,Is it possible to establish Inter cluster trunk between CUCM 6.1 & CCM 4.1 versions. I have gone through documentation for 6.1 but didn't find compatibility of features with other versions.Regards...-Ashok.
Hi all,I am having a problem in application integration. My problem being that I have no Devicelist. When I navigate to http://x.x.x.x/CCMAdmin/reports/devicelistx.asp I get "the requested resource is not available".Can anyone tell me how to enable t...
Is there a way to get a report from CAR that would show the number of calls for a particular route pattern?We have some route patterns that are routed to external IVRs. The call comes in on one of 5 PRI/T1 and then are routed out another port to the ...
Hi,I just installed CUWL license on my Publisher version 6.1 CUCM Server. The CCM node count (as you would expect is 1)I will be adding a second CUCM.Does anybody know what the procedure is for obtaining a second node license?
i have a cluster of 2 servers running 5.1.3 and have purchased CUWL upgrade for the cluster so i can use 6.1.2 and implement some new features. What is the best process for upgrading and getting the new licences through on the CUWL front. Also during...
