Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,"isdn bind-l3 ccm-manager service mgcp" command is automatically missing from the isdn interface and all the phones are going down. This has been happening intermittently at several locations. When I re-issue the command, it works fine.Can you ple...
HelloI've a CCM 5.1 configured as a DHCP server, and a DHCP Subnet with a mask of 24.I used all the IP addresses availables in the subnet, and I would like to know if anyone knows what's the default lease time, and if it's possible to reset the DHCP ...
Right now we are setup with a personal ext of 6xxx and an ICD (IPCC express) ext of 5xxx. When someone picks up the phone to call outbound, it automatically picks up 6xxx. Is there anyway to make the phone pick up the 5xxx ext as the primary ext? Als...
hello everybody.I have CallManager 3.2, one cisco 3662 with two ports. Can I install two "caller ID DN" with such configiration? and numbers with different "caller ID DN" have to go out from cisco through different ports.thanks for your help
Hi,Is it possible to connect to a phone like you would connect to a console port of a gateway ?I have a 7970 that does not start. All I get is a fixed green light on the speaker button. I tried the factory reset but then again nothing happens.Thanks,...
Does anybody have done successful CCM5 system backup and restore procedure without errors?I have problem with database replication on subscriber so I'm interested does anybody have the same problem.
Hello,I've a CCM cluster with 4 servers and I see in Media Resource that 1 server is not listed under MOH/MTP/... default resources. Do you have any ideas of what could be the problem?I'm not sure if manually adding the server could help.ThanksBest R...
Hi - I want to set up a directory listing available on our 7970 & 7941 phones. It will not be integrated with our AD. Many of our phone users are not pc users and therefore are not in AD. I'm not finding much in the way of assistance or am not loo...
Hi,Have a 4.1(3)sr4d system and the insertcdr.exe service was spiking the CPU. I had to stop and start the service to clear the CPU spike. All the CDR folders are empty on the publisher and CDR enable set to true and records inserting into the databa...
Hi,I am having trouble establishing multiple simultaneous Meet-Me sessions.I have one CFB (Software) setup - which is globally accessible. As stated I can establish one "Meet-Me" conference, when other "Meet-Me" conferences are sttempted, they recie...
I've a Cisco Unified CallManager UP and running.Successfull in recieving a call from cisco extension to X-Lite SIP soft phone.Now i'm trying to register Built-in E65 VOIP client with CMM 5.But client registration is failing on E65 phone.Phone is conn...
Hi gurus,Where can I find the BAT excel file for CCM 5 so i can pre-populate it with data and import it into CCM?SInce it is an appliance server, I'm not sure where I can find the file.Would appreciate any help.
We would like to activate the do not disturb feature on our callmanager 4.1 we have serveral 7040's and 7060'sThank you for your time
We are experiencing slowness with callmanager and High CPU utilization after upgrading from 3.2.1 to 4.2.1. Below are the symptons: Loading Call Mgr. Admin pages has been unusually slow. Going from the "Phone Configuration" page to the "Line Config...
Hi allIm having an issue with meet me conferencing in CCME.i have upgraded to version 4.1 and configured meet me Scenario conferencing.i have 4 DSP Modules .when i dial Meet me number in first phone its getting connected.when i dial Meet Me number i...
