Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Is the following port config valid? Specifically can the srr-queue bandwidth commands be used on an interface without enabling auto qos voip on the interface? interface GigabitEthernet1/0/1 switchport access vlan x switchport mode access switchport n...
I have a user that I created a Hunt Pilot, Hunt List and Line group for. Some of the phones in the line group are not always manned and they do not want these phone to ring when no one is manning them.Is there a feature I can add that will make the p...
Hi Everyone,I have a 4 port FXO which is being used as the incoming/outgoing gateway for a CME on a 2801. The issue I am having is that after a certain amount of time/calls the FXOs are locking up and staying offhook.This then causes the issue of all...
hi all,some users are compalining the voice is not clear (a lot of cut-off and muting while speaking), I installed a sniffer in the network but couldn't find the reason, how can i start troubleshooting and find out what the reason of this disturbance...
We have a legacy alcatel switchboard and CM5.0 . We connected these two systems using PRI on a 3825 router. When alcatel users call a cisco user, cisco users can see who is calling. However, when cisco users call alcatel users, alcatel users cannot s...
Hello,I saw in the SRND that 500 locations are supported. What are the restrictions on Calling search space and Partitions of CCM. Best regards,Piet.
I am trying to modify the Auto call select and the Softkey timer on a 7970 phone. I cannot edit the parameter. Is there a way of doing it. I am using CCM 5.0.4 and SCCP11.8.2-1S
I have an intermittent issue where the softkeys will disappear. The scenarios goes like this. You are off hook speaking with caller #1. You recieve a second call and place the first caller on hold. After sepaking with caller #2 your softkeys are ...
Can anyone tell me how to user the Tone generator on a 7961, if it has one !I have followed the instruction on CCO for the 7960 but I do not get a "tone" softkey.I can find no instruction for a 7961 but this is the only phones we use, any help ?
Hi guys,Two very stupid questions:1) Is there a possibility in CCM 5.1 Linux server to start some kind of GUI for the Linux system itself (not for CCM)? 2) What is the best method to transfer files (e.g. license files) from a Windows PC to a CCM 5.1 ...
How can I force a Gatekeepr controlled trunk to register to gatekeepr with TCP port 1720.Looks like it just picks up a random port.
hi, i have CME in 2801 Router, i have connected an analog phone to the fxs port, automatically it have tone, but i want to know what is the DN affected to this anlg Phone, after this a have another problem, i will evoke this after. Thanks
I want to create a lab to mirror my callmanger enviroment. I would like to purchase servers that I can run 4X 5X and 6X on. I have been looking on the link http://www.cisco.com/en/US/products/hw/voiceapp/ps378/prod_brochure09186a0080107d79.html. I...
Hello,After upgrading our CCM from 4.1.3 to 4.2.3,when we use IP communicator 2.0.2 we are not able to select a ringtone anymore.The problem is that when you click the ?chirp1? or ?chirp2? ringtone,you get the ?ringlist unavailable? message.Has anyon...
Hi I need help on basic config of BTS 10200how the BTS 10200 communicate with Callmanager
