Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi guys, quick question: After resetting a 8841 Phone (without CUCM provisioning) there is an administrative web Interface https://[IP]:8843. Can anybody tell me what are the default credentials at this point ??? Tried a couple Cisco, debug, MAC adre...
Hello Everyone, Very good Morning.. Wishing you very Happy New year to Everyone!!!! I am very new in this domain, This year i decoded to do a CCIE in COLLAB, Before this i was in R&S. I need a great help and suggestion to setup a CCIE LAB at ho...
I have the following set up: SIP Trunk SIP TrunkPSTN--------------------------------CME-------------------------------------------------Lync |...
CUCM includes a basic DHCP server capability. It is intended to support only IP phones, andnot very many of them: only up to 1000 phones. _________________________________________ New learner trying to put this in real life understanding: -----------...
Hello All,I'm trying to drum up support to get Cisco to identify and fix lagging DTMF issues in various Cisco SIP phones. I've mainly been working with 7800 series phones lately (with both CME and CUCM). The lag issue primarily appears when users hav...
Hi; in my system only 8845 ip phone couldn't call over siptrunk but can be called Cucm ---SIP Trunk----cube----SIP Trunk----- ISP
Hi, I'm running a voice gateway with three connections: - PSTN provider (ISDN) - Legacy PBX (ISDN) - CUCM (SIP) I translate everything to E164 as soon as it comes in, so all routing is on that. I have a dial-peer to the PSTN for +T, so anything...
Hello all,Not sure if anyone else has ran into this while upgrading their systems to CE8.3.0, but I have ran into this on every SX, DX, or MX system I have upgraded. NTP appears to not properly re-establish after the upgrade and reboot. Below are th...
hello, Why is all my external number is showing next to my internal number like 1XXX(0XXXXXXXXXX). Is there any way to disable it in CME configuration?
Hello All, Gateway: ISR4321/K9 IOS-XE Version: 03.13.04.S IOS Version: 15.4(3)S4 I am trying to test the SRST failover of an ISR Router, but after I cut the connection to CUCM, the IP Phones never actually register to the Router. See below for conf...
Hi guys, A strange one, as it seems. Setup: ISDN - 2911 - CUCM - IP Phone Calls go through ISDN via 2911 to the IP phone, got silence from ISDN to IP phone. It does work well the other way, I can hear voice coming from IP Phone to ISDN. The s...
How does everyone manage phone numbers for what is used and available?Shared excel documents don't work.Prime doesn't work for this either.There has to be a tool out there that can take an input (DID range X-Y) then look up in the database for DNs, T...
Hi, We configured a Cisco ISR 4321 as MGCP to the CUCM 10.5. Upon checking the output of show ccm-manager the status is registered while on the CUCM side, the E1 port is on unregistered status. Please see the information below for the ISR 4321: SPMY...
Hello, I am trying to register an SPA 112 with CME 8.5 on Cisco 2811. I have configured the SPA mac address as a third party sip phone. However, I dont see the SPA registering. SPA line status says "registration failed" and I dont see any active re...
Hello all We have a remote site where there are 4 8831 conf phones and several 8841 desk phones. When dialling International code in Mexico we use 0 for line then 00 for international. However, when trying this the conf cuts out after the third 0. Th...
