CCME Bug???

[ken.chua]

-CCME 4.1

-Analog trunks

Dial Peer for international dialing

!

dial-peer voice 314 pots

corlist outgoing long-distance

destination-pattern 9T

port 0/3/0

!

If you dial 9 or 9# and wait for the inter digit timeout. If you give you a second dial tone. From there you can dial anywhere.

How do I fix this? Thank you!

In addition, PRI does not have this problem. Only analog trunks

[paolo bevilacqua · Accepted solution]

No bug.

dial-peer voice 314 pots

destination-pattern 900[1-9]...T

prefix 00

replace 00 with your international access if different.

Hope this helps, please rate post if it does!

[ken.chua]

From Canada, our international code is 011+

Can I do it like this?..

dial-peer voice 314 pots

destination-pattern 9011T

prefix 011

Thanks Paolo!

[paolo bevilacqua · Accepted solution]

Yes, but the destination-pattern I suggested, is "better" because it enforces both pattern for country codes (none starts with 0) and a minimum number of digits to follow.

Hope this helps, please rate post if it does!

[ken.chua]

I got you! Thanks again for all your help!

[paolo bevilacqua]

Thanks for the nice rating and good luck!