MPLS

We have a client connected through VSAT. I am at Service Provider place and client is connected through VSAT link in MPLS cloud. I am facing intermittent ping drop in the tunnel interface terminated at other end. Pl help how do i check the trouble sh...

Hello,I do have one scenario where CE1/CE2 is connected with SW1 port Fa0/1 and port 0/2.CE1 is belong to VLAN100 and CE2 is belong to VLAN200. Now SW1 is connected with PE1. Link between PE1 and SW1 is trunklink with .100 and .200 subinterfaces. Now...

Hi,How OSM and Enhanced Flexwan access the CEF table on 7600? If they use the PFC3 or have they own?The reason is they are not having DFC by default but still have local FIB/CEF table. What is purpose of this ??Regards,Chintan

I'm trying to bootstrap myself on MPLS and ran into an unusual problem in the field.We've got a mesh of routers setup to do tag switching amongst each other to support a few pseudo-wire MPLS point to point links for customers.Our typical conf:ip cefm...

hi,can anyone tell me how can I contact an ISP?how can i know what protocols they are using and size of their network.thank you.

Hi,I am thinking of using Catalyst 3750 switches (running IP Services image) for peering with Service Provider PE routers.Are there any disadvantages /limitations in using Catalyst 3750 switches for this purpose over Cisco router platform?Thanks

hi allwe are running two RR for mpls vpn routes. As we know RR are prevalent to accept the same route with same rd from different PEs. But in our cloud we are receiving the routes of one RD from different PE which should not be. We are not able to fi...

at r1,r2 rr-group both deny rt 1:5.why can r5 learned route of r8??and why can r5 can ping r8?topo and configration download

question:at r1,r2 rr-group both deny rt 1:5."ip extcommunity-list 1 deny rt 1:5"why can r5 learned route of r8??and why can r5 can ping r8?

we are having a gateway router which is running a public as and having a direct peering with service provider. We are also working as MPLS-SP and providing internet services to our esteemed clients. Now I am facing a one issue if the customer is comi...

Hi Experts, Can any one explain me about MPLS technology.I want to have a sample MPLS configuration of C & CE Routers and P & PE routers on a end- end network. Also looking forward to know all the basic requirements & products to configure MPLS on a ...

topo download

Hi Requirement is to multicast music on hold RTP stream from a Data Center to a remote site over BT IP Clear MPLS network. Catalyst 3750 switches (both running IP Services Image) will BGP peer with BT PE equipment. The Catalyst 3750 switches will als...

hello,how can I compare is-is and ospf protocols in service providers' network ?which one of these two protocols is used in service rpoviders' network mostly and why ? and why service providers are moving from ospf to is-is ?please explain me these.....

Dears ,<br /><br />I'm planning to take MPLS VPN with two ISP's . The design is as atteched.Is there is any better option avilable for me ? . I have an internet connection on HO and on the same router I'm terminating 3 GRE Tunnels. What's the suggest...