MPLS

Hi,I have a strange problem, I have configured Policy Maps for rate limiting and tagging of L2 frames with EXP bits 6. The VCs are up and everything is fine. The problem is it Rate Limiting does not work when I transmit untagged frames, but it works...

hello, because 2801 cannot do vpls. can i use l2tpv3 to do layer2 tunneling in 2801? tx

Would like to seek your help to resolve one EoMPLS problem.My EoMPLS topology is-CE1[3640]---(FE)---PE1[7206VXR,NPE300]---(FE)---P1[3640]---(E1)---P2[7206VXR,NPE-G1]---PE2[7206VXR,NPE-G1]---(FE)---CE2[3640]I had configure Ethernet over MPLS on subint...

We offer wholesale Internet and I want to limit customers to what they paid for, what is best approach of of limiting to what they paid for? Is it rate-limiting, policing, or shaping and what effect does each command have of the customers.

HiIs Atm and Fr PWE supported in a 7600 with Enhanced flexwan and Port Adapter or is required the SIP 400 and SPAs??

I have a lab environment where I'm duplicating our production network (to a small scale). I have the following:C3550--C6503--ME6524--C3550 CE#1 PE#1 PE#2 CE#2I have the 3550's participating at CE's to the C6503 ad ME6524 as PE's. At each CE,...

Is it possible to configure PBR using route maps on the MPLS. We need to do add a different internet route based on extended access-list which will be different from the default route in the MPLS

After we migrated to an MPLS network, we are not able to access hosts using Remote Desktop Connection through the MPLS network. Hosts use Win XP. Yet we are able to access servers in sites on Win 2000 server. Any suggestions would be appreciated. ...

Hi,Does any know how to import some of the vrf routes into global routing table.

Hi,I'm trying to send multicast video streams over my MPLS network (IP-VPN) and my remote router is a 2800. When remote users open three channels, the remote router cpu raise to 99%. My remote router is a cisco 2811 (C2800NM-ADVENTERPRISEK9-M, Versio...

Hello, does 2801 support vpls? tx

CPE --- PE---P---P---PE----CPEAbove is the topology. We need to enable the cRTP between the CPE devices.SP will not configure the cRTP on the PE Devices.How we can achieve with L3 VPNs?

Dear Experts ,I'm trying to run MPLS between two 7206 vxr router which is connected behind a Foundry Big Iron L3 router which is configured as a L2 device . I put on my 7206 as int gi0/1ip address 172.16.14.1 255.255.255.0mpls ipmpls mtu 1526But it...

Is there any simple method of checking the traffic switchover from main to backup tunnels? I have configured MPLS FRR in the network the traffic is switching but the failover rate from A to B is much more than from B to A.Also, how do I confirm the b...

Hi,In my PE, i would like to access a computer 10.50.0.1 in vrf A from the global routing table.I have this configuration :int loopback0ip address 10.0.0.1 255.255.255.255int vlan 1ip vrf forwarding Aip route 10.50.0.1 255.255.255.255 Vlan1ip route v...