Network Management

So I'm using the following snmp-server view:snmp-server view CW-Cutdown mib-2 includedsnmp-server view CW-Cutdown at excludedsnmp-server view CW-Cutdown ip.21 excludedsnmp-server view CW-Cutdown ip.22 excludedsnmp-server view CW-Cutdown ciscoCdpMIB i...

Hi,Is CSCed27344 fixed in any version 12.4?Please suggest.-Thanks

When we run a device discovery (CDP layer 2) most of the times the process keeps on running eternally. The only thing to do is stop/start of the cmdiscovery process. Other people encountered the same problem, any ideas concering this issue ?Many than...

Good day, has anybody seen UserTracking reporting Port speed as 0K on FastEthernet ports?Our client has about 4500 devices, and after User Tracking has completed, it detects over 130 000 MAC/IP's. Over 800 of these shows port speed as 0K instead of 1...

Hello I receive this trap for and Aeronet"Unknown alert received from device xxxxxxx of type AironetIOS. Device Time 28+12:43:05. (Trap type 1.3.6.1.4.1.9.6.1)OID: 1.3.6.1.4.1.9.2.9.3.1.1.1.1 Value: 5OID: 1.3.6.1.2.1.6.13.1.1.10.130.47.26.23.192....

When I upgrade the IOS of the switches to version 122-35.SE , then the ACS 4.2.124 encounters a problem so the status of the ports can not be displayed in the ACS software as graphical view

Hello , Dears All,We would like to retrieve a log where there is a event associated to a device under RME.I have read this document :dfm_ug.pdf and there is a lot of logs associated.In which file.log can we see event by device ?Thanks

While monitoring CBQoS policies, we are facing a peculiar issue in some of the routers. The issue is when you change the values on the policy applied on the interface of the router and when you do QoS policy update on the Analyzer, we are getting ...

Hi all, i would be really grateful if someone can forward me in the right direction. In my ccie prep and real world troubleshooting, i often face problems where i dont get how ios is processing the packets. Now on my surfing, i see ppl saying that fe...

Hi clarke, is it possible to get email alerts for the cisco device which reboots. If not any script to be changed or not possible. Version = LMS 3.1 ~PR

Hi,this may seem like a silly question but I really cant get round to understanding why it is so.when a cisco box is configured to send traps, a community string is also required.however as far as i can understand the receving management station does...

when using visualization and I click on the site VTP domain name, I don't see anything in the port list, however I do get device Icons underneath the site VTP domain name on the left side of the screen.I would like to get all devices in the port list...

I need help on basic configuration for two routers to talk with two different networks. Please email me a basic configuration that I can use. I have two Cisco 2801.Please advise.Thanks, June