Network Management

Hello,I have one 6509-E Sup720 what is sending its snmp get-responses out as a broadcast packet. Of course this it not allowing the switch to be monitored over the wan as the broadcasts are being dropped over the routed hops. Has anyone ran into th...

I have several managed devices in DFM that are in "All Questioned Devices in Inventory Services" under SNMP timeout. These devices were in "All Known Devices in Inventory Services" before. What caused this and how can I rectify this problem. Thank...

Hi,the issue am having is that under the RME inventory devices,i view the config of one of the devices that is manageable and i also view the config of one of the devices that is unmanageable.I found out that the configs for these two devices are the...

Well here we go again. I don't know what happened but all 600+ devices are back in questioned state. I have tried to rediscover and delete/rediscover but that has had no effect. Sticks at 40% for a while then back to questioned. I have heard rumo...

Does Anyone Know what the Impact of Multiple RTT operations would be on the Network / CPU and where I can find the information. Thanks in advance!!!

I have tried to manage the log file by using Logrot but unsuccessful. I just use the default size for backup 1024. do I need more? I don't want a big size... I have attached the output. thanks in Advance

Hi there,how do I receive "% Authentication failed" in syslog ? I am receiving syslog for interfaces, configuration changes and access list blocked events but not for authentications...Thanks,Vidir

Can you please share some keys to securing a switch/router, not so much physically, but in regards to authentication and encryption. aaa vs. local accounts?https instead of http?What else?

Hi,The number of unmanageable devices discovered is more than manageable devices discovered.

Hi All,We are using Ciscoworks v3. I need to find out exactly how many ports in total we have in all the switches that are in our network/ciscoworks. This is for both active and inactive ports. Where can i get this info from?We have SNMP setup on the...

Does anyone know how I could find a users ip address? I keep seeing the Fasttrack protocol in my ip nbar protocol discovery. I want to find out who it is. Thanks ahead of time.Donnie

Hi people,Can any body give some suggestions about Loopback & Distribution list.1. What is the loopback address & how it will work out?2. What is the Distrubution list?Regards,Naidu.

Hi All, The NetConfig job approve option seems to come active as soon as you open the link from the e-mail, but then goes grayed out immediately. I am on the Approver list. Any suggestions???Thank you.