Network Management

I have install LMS 4.2 and nat ip to discover found WS-6513 but cannot polling inventory.I serch for document about configuration on Network Devices such as switch, router, asa etc. to support LMS.But I cannot find it, anyone have example configurati...

Hello,I will  monitor the wireless network for a few days and just that monitor  traffic and document (utilization, who was on which AP connected ..)The wlan consists of a WLC 5508 APs and 50x 2602i.how can you find over time, how many and which wire...

Hi,is supported on C4900 EtherChannel Min-Links Feature? Or is there any alternative?I have three switches, connected in a triangle, each is connected with a second 2x10GbE in the EtherChannel.I want when one line in EtherChannel fails shutdown the e...

Hello,has anyone experience with customization of a virtual applaince as broached in the data sheet for Cisco Prime Infrastructure 2.0  on Page 5 of 7 ?...* Custom Express is not available as a separate OVA download. You will need to download the Exp...

Hello,I'm using NAM in my company to control the use of aplications in the Network, all seems to be ok but the only problem is when I want to see "host conversations" no data is collected and presented in these three fields : cnversation to .., conve...

I have a Cisco Prime Network Registrar 8.1.3 cluster all running on VMWare using the Cisco PNR 8.1.3 OVF appliances where we recently started having a problem where during the default four hour sync to the PNR Regional server, we're seeing high load ...

Hi,Is there a way to correctly display ASR9k in Cisco view? I can see a ASR9006 chassis with fans, no RSP, and Unsupportd Cards display; or ASR9001 with no PSU, and no cards.I have a following hardware config:ASR 9001NAME: "module 0/RSP0/CPU0", DESCR...

HelloIn our company, we are using Internet Explorer, and therefore we have to use Google Chrome Frame plug-in for Internet Explorer, for our Lobby Ambassadors to create guest-users to the wireless infrastructure.But now when we are using Chrome frame...

Hi All,I running both Prime 1.3 and Prime 2.0 and when I import a CAD dwg drawing intoPrime 1.3 it renders fine, but doing the same in Prime 2.0 and the drawing appears witha black background. I have checked Bug Track and found nothing, any answers ?...

HelloI have lots of SW 3850 which failed on inventory collection with an error:" Collection Status Collection Other error: Wireless Controller inventory collection failed.Status :  Failure to collect feature DCAConfig"Half of the devices (50 upon 100...

when i go to device center to check my switches configuration http 500 error appear. attach is the error that appear and pdshow file for reference. how to solve it?

Can anyone help me how to monitoring syslog and users log (which command use specific user). if any software or hardware need for this purpose we will purchace it. note that our network running all cisco devices (router, switch, ASA etc) and more the...

image :c7600rsp72043-ipservicesk9-mz.122-33.SRE2.binI use the oid in my network management ,but shows the data is not accurate.CPU under:OLD-CISCO-CPU-MIDeg: 1.3.6.1.4.1.9.2.1.58so i need  help for another cpu oid  .thanks!