Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco Works Small Network Management Solution CWSNMS

Hi,

I am trying to add devices (1 4506E and 2960G)to RME in CWSNMS both through the Admin->Essentials->Inventory->Add Devices and by adding it to Whats Up Gold and then exporting it to Essentials. But both the time I can see the devices in the inventory but then never appear under Essentials tab. Now according to the link http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_small_network_management_solution/1.5/device_support/table/snms1_5.html

2960 is not supported by CWSNMS. But 4506 is supported with supIV. I have 4506-E with supIV.

Should CWSNMS 1.5 support 4506-E with SUP-IV?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Cisco Works Small Network Management Solution CWSNMS

No. The 4506-E is a newer device with a different sysObjectID from the 4506.

4506 : 1.3.6.1.4.1.9.1.502

4506-E : 1.3.6.1.4.1.9.1.875

1 REPLY
Cisco Employee

Re: Cisco Works Small Network Management Solution CWSNMS

No. The 4506-E is a newer device with a different sysObjectID from the 4506.

4506 : 1.3.6.1.4.1.9.1.502

4506-E : 1.3.6.1.4.1.9.1.875

176
Views
0
Helpful
1
Replies
CreatePlease to create content