Hi,Is it possible for a host (in this case a tape library) to be in multiple vsans on the same switch ?, I can configure multiple vsans but when I go to the host it can only be a member of 1 of them, which kind of defeats the idea ...
Im having problems to access to the DMM.I've already installed the VMWare from the ciscoet but I can't access to the DMM principal page. I believe is a problem with the VMWare.Did anyone have the same problem?
Hi;We use 9216 for replication on two site. Two days a go, it started to reboot itself. After reboot it works 20-40 minutes then restart again and these occures several times. We couldnt find out why ? I attached tech-support output. Could you say so...
After trying to activate a zoneset we keep seeing the following log messages endlessly repeating:2012 May 4 02:01:45 mds209017901-f1 %ZONE-2-ZS_CHANGE_ACA_FAILED: %$VSAN 265%$ ACA failed : domain 0x63 returns FABRIC_CHANGING2012 May 4 02:01:45 mds2...
Dear All , I have a MDS 9216 connected to an MDS 9124 . The connected ports are showing as E Ports and not TE ports . What do I need to do to get them in TE mode of operation . MDS 9126 fc1/2 --------------------- fc 1/3 MDS 9124 MDS9216# sh int fc ...
Hi AllAnyone have the cisco 7000 fcoe card working, tac cannot help me new bug apparentlyNXos-5.2(4)Cisco ucs 1.4(3l)cannot start services is the error ? Licenses are installed on the root vdc and enabled for the module in slot 9appreciate if anyone ...
What is the command to change the default fiber channel domain id from 0 to another value so it can join an existing fabric?Sent from Cisco Technical Support iPad App
We have a customer how has a 10Gb Sat link between the HQ and the DR site. On a 10GB Satellite WAN link, the 4 to 5GB of backup takes more than an hour which is highly unacceptable. The WAN is connected via Cisco Router and the routers are not d...
So, This is going to have like no tech info, I'm currently gathering all that up.But has anyone one here had this issue.I have two server VM guys trying to do vmotion from one storage array to another and they are getting to what the tech has called ...
When creating the a vPC on a pair of N5548UP’s how should the channel group mode be set when connecting to a Emulex CNA with the ports attached to a the N1K?I have configured the mode as “active”, however, when the server is booted and the physical p...
is it possible to bind a portchannel carrying multiple fcoe vlan to more than one vfc in diff vsan?Lets say with one N5K connected to N7K using a eth-portchannel carrying FCoE vlans 100(vsan 100) and 200 (vsan 200). Is it possible to configure two v...
Folks, We have a core 9513 switch with 6000 zones, when we try to active the zone, we can zone activation errors on the small blade chassi switches.Does any one know the limit of zones the blade center switches can support.Also how can I copy ...
Hello,I have some logs in Nexus 5k that I didn't found in anywhere and would like to know what this means2012 Apr 1 02:16:40 TJERJ481 %PORT-5-IF_TRUNK_DOWN: %$VSAN 2001%$ Interface vfc40, vsan 2001 is down (waiting for flogi)2012 Apr 1 02:17:11 TJE...
