About laith_mig

laith_mig · 08-08-2017

Dear All; I was deploying Prime Infrastructure 3.1, license has been installed, I was trying to add the following PIDs of nexus switches: C93108TC-EX, C9272Q, C92160YC-X. Unfortunately these devices appears as Unsupported device type. When I've check...

laith_mig · 07-30-2017

Hi all; I was trying to upgrade FXOS in Firepower chassis Manager (FPR4100) to 2.1.1.73 version, once the upgrade completed the chassis reloaded but unfortunately I lose communication with the chassis management port, When I've checked it through con...

laith_mig · 01-08-2016

Hi; I am Trying to configure snmp V3 over nexus 9000 switches running 7.0(3)I1(3), it seems that The priv option (Privacy password )along with the aes-256 is not supported through NX-OS. can anybody advice me about that as this is required from the c...

laith_mig · 08-25-2015

Hi all; I have configured LMS 4.2 to receive snmp traps from my network devices, and by debugging the snmp packets it seems that the configuration working well as the LMS polling the devices every 2 minutes. The problem is that the topology servi...

laith_mig · 05-28-2015

Hi all;I am asking about the Failover (Active/Active) on asa 5525-x SFR.I am configuring Failover(Active/Active), and make sure that the configuration of the failover is correct, between the tow appliances.But when issuing the command failover on the...

laith_mig · 08-28-2017

Many Thanks, I see the posts in the shared URL, I will follow it.

laith_mig · 08-01-2017

Thanks for reply, I've connected to the chassis using console and try to revert back to the old image 1.1(4.95) using /firmware/auto-install # install platform platform-vers 1.1(4.95) but I get the same crash logs, so the management port as well Fibe...

laith_mig · 07-30-2017

thanks for reply, Yes I upgraded FX-OS from older version as you can see from table below: firepower /firmware # show package Name Version--------------------------------------------- -------fxos-k9.1.1.4.95.SPA 1.1(4.95)fxos-k9.2.1.1.73.SPA 2.1(1.73...

laith_mig · 05-17-2016

Dear jossabor; Thanks for clarification, but is that even planned in the road map? we are now comparing LMS with the other products (non-cisco) monitoring tools. As you know the other products gives you a map with the devices status "auto refreshed" ...

laith_mig · 05-31-2015

Hello Andre; Thanks for your reply. I have checked the software module and it was need a recovery.So i issue the recovery commands for the SFR module.It is done. Regards

Member Since	‎05-28-2015 10:58 AM
Date Last Visited	‎06-26-2020 12:54 PM
Posts	10

User Statistics

User Activity

Prime Infrastructure 3.1 Supported devices (Nexus 9000)

Firepower FPR 4100 FXOS upgrade Failure

NX-OS Snmp V3 privacy AES key, snmp filtering requests

LMS 4.2 Topology service not reflected summary online

Mate NOT PRESENT ASA 5525-X

Re: Hi

Thanks for reply, I've

thanks for reply, Yes I

Dear jossabor;

Hello Andre; Thanks for your