About shobaloju rilwan

shobaloju rilwan · 08-07-2015

Hi there,I am currentlyworking on a Site-to-Site VPN deployment that is suppose to failover between aprimary ISP and Secondary ISP link. Such that when the primary link fails, iVPN tunnel should be setup with the backup link as seen in the config bel...

shobaloju rilwan · 03-31-2015

I am planning a DAUL ISP VPN failover implementation on a client site and I am having difficulty understanding how to make it happen. My concerns are based on the fact that VPN Peers are defined during IPSEC L-2-L VPN config. How do I configure the r...

shobaloju rilwan · 09-01-2015

Thank you all for your responses. I eventually implemented DMVPN to solve the problem. Regards

shobaloju rilwan · 08-12-2015

Its is typo error. I am actually tracking 100 and 200.

shobaloju rilwan · 08-12-2015

Thanks for your input, I have tried this out but it did not work. Meanwhile i have also tried to reconfigure my tracking as belowtrack 100 ip sla 100 reachabilitydelay down 10 up 20!track 200 ip sla 200 reachabilitydelay down 10 up 20!ip route 0.0.0....

shobaloju rilwan · 04-10-2015

Yes you can very well have an IPSEC encapsulated GRE Tunnel with backup Link. YOU might have to configure your router for WAN fail-over first then use Cisco Configuration professional or SDM for your GRE Tunnel configuration for ease of config

shobaloju rilwan · 04-10-2015

How about using a GRE Tunnel that can point to Two ISPs, Primary and Secondary at the same time such that if the primary link fails, the secondary link kicks in. It might only mean that i will need to need to setup two GRE tunnels pointing to the Two...

Member Since	‎09-08-2013 05:59 PM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	10

User Statistics

User Activity

VPN failover ISSUE

VPN Failover

Thank you all for your

Its is typo error. I am

Thanks for your input, I have

Yes you can very well have an

How about using a GRE Tunnel