I recently took over some IT support for a small church and they asked me to look at the SPA525G phones and figure out why the MWI will not indicate correctly if there are voicemails or not. i have turned on the message waiting under the EXT1 tab fo...
I am new in VOIP.I have cisco 2811 router including PVDM2-16 and VIC2-4FXO. 10 nos Cisco IP Phone 7940G.And I have epbax having no ip card.So now I want to go VOIP solution.How will design the VOIP and configuration.Looking forward kind help and plea...
When for example 5 7965 phones are in a broadcast hunt group, if one person answers the call for the broadcast hunt group, all other phones display a missed call.Is there any way to stop this from happening? Also, is there a way to disable missed cal...
Can anyone actuall tell me what the following means on the show license feature:I have attached a word document to explain, it seems that i have adv securty enabled but no right to use it, and advanced secuity with a right to use but not enabledcan a...
I have a VPBX and use a call box at the front entrance to a local jail.When the Avaya LUADS Dev 156 goes off hook the dial plan dials an extension inside the jail.The call is properly routed from the callbox through a Linksys SPA2102 through the VPBX...
Dear Sir,I have one more scenario problem if you please guide :The scenario is i am reciving the call from PSTN on cisco gateway 5400 and which forwards the call to softswitch. Now i am using two stage dialing for this scenario. The customer called 1...
I am trying to bring up a SIP Trunk to AT&T IP FlexReach Service. I have a Cisco 2811 configured as a CUBE using the documentation at the following link http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns728/ns784/798119.pdf. This document...
Hi Expert,I need to ask for your advice.Please look at the the following diagram. Phone No.900 [AnalogPhone1]--[FXS]-[VGW1]-[E&M]===cable===[E&M]-[VGW2]-[FXS]--[AnalogPhone2] Phone No.100I would like to make telephone call from [AnalogPhone1] to [An...
Hi iam new to voice field , can anyone help me to know the advantage of T1 PRI over T1 CAS in voice over IP and where to use this to have better performance