VPN

Hello,Wondering if somebody can help me with a NAT issue I am having on our ASA.Background info.We have a remote site connected using EZVPN to our ASA in our head office.  Our CCTV provider would like to access the CCTV system on site externally.  Wh...

i have an ASA 5520 with 7.2 and asdm 5i ve done all the needed config and everything is working except the rdp port-fowarding actually the problem is coming from the client side the java can't accept the certificate from the asa so is there a way to ...

Hello All,I have problem with reverse route injection in IPSec scenario, just say i have a topology like this (i will post full topology and configuration later, sorry for that)(LAN)-----(VPN_HO) -----(ISP)----- (VPN_BRANCH)-----(LAN)VPN running succ...

WE use ASA as remote VPN and use DHCP pool on this ASA. Is it possible to block a specific MAC from getting IP from this pool?thanks,Han

I have an ASA firewall,i also have a Motorola router that is actually a modem and a router and an access point in the same time (3 in 1) ;however iam only intending to use the Motorola internal ports to connect to the external ASA port, when i finish...

Hi there,I am having issue with SBL. I have configured webvpn on ASA firewall with LDAP authentication. The vpn client gets installed and I am able to login using AD username and password. Issue starts when I am configuring SBL. As I enable SBL, the ...

dear all , i have configured my remote access vpn and its working perfectly....now i want to have internet access via split tunnel which i have already configured but still i cant have internet via the VPN , someone please assist.attached is my confi...

Hello, I have about 5 Catalyst 3560 switches on a subnet. I can log into them via web interface and go to "Configure --> Express Setup". Can I change the IP address (and the host name) in there without worrying about devices connected to it loosing c...

I'm having some issues getting a l2l VPN up.  I have never had any issues before.  I've always used the ASDM and it just pops right up.  These are the IKE statistics I'm getting, but I can't find any info on what the failures mean.... The initiator f...

Hi,     First I would like to note that I sanitized the IP addresses in these logs. I am by far no expert on VPNs, but I am trying to pinpoint a solution for a far reaching problem we are having. We have a DMVPN setup that has two destinations from t...

We currently have the following scenario with 2 ipsec vpn tunnels setup.inside LAN = 172.20.136.0/24Remote Site1 internal LAN = 192.168.1.0/24Remote Site2 internal LAN = 192.168.2.0/24The VPN tunnels establish without any issues and I can connect to ...

Dear Experts,       I have a site to site tunnel bw ASA and Cisco 1941 routerbut strange the vpn is not coming up and when i issue sh crypto isakamp sa on firewall its stuck with MM_WAIT_MSG2 when initaitor and stuck with MM_WAIT_MSG3 when responder ...

I have an ASA with 9.1.1 code using the corperate LDAP for authentacation, and it works great, but the customer also wants a few accounts with local login, In case the AD goes down.  I have never tried this, I have done one or the other.Is this possi...

Hi all, Ive had a 2620 in my lab rack for years now, recently got hold of an access server to connect to the console port and use the whole lab remotely. All was well for a few weeks then one day I booted the lab and one device wasnt working respondi...