VPN

Hello,I have configured multiple Anyconnect TunnelGroup profiles with each is own policy (ip pool, radius ...) Each TunnelGroup is forced under the .xml file deployed with annyconnect under the <UserGroup>tunnelgroup</UserGroup> section of the .xml f...

Hi,WE are using WS-SVC-NAM-2 with 3.5(1b) code, suddenly we unable to generate the basic report, when we try to create a report, after some time its showing as no data, please advice.

Hi, hope someone can help with this. I am trying to establish a site to site tunnel between an ios router and a PIX 7.0(1). The ios router is 12.4(15)T7. At the IOS router side I have configured a static 1 to 1 NAT to translate the 172.31.x.x source ...

i have already l2tpv3 tunnel between 2 routers :l2tp-class l2tpv3.class authentication digest secret 7 0701234D4A2A363732010E0F162F3F hash SHA1 password 7 082F4E4F0D3A2A25370A1910223B253B20222D0103 receive-window 100 retransmit retries 10pseudowire-c...

Is there a way I can have clients get an IP from a windows dhcp server scope other that the scope the concentrators internal interface is on? I'm running out of IP's on that subnet.Thanks

Hi, i gave this Cmd Show ISDN Status, & i am getting below msg in Layer1.So what could be a Problem.ISDN BRI0/0 interface dsl 0, interface ISDN Switchtype = basic-net3 Layer 1 Status: ACTIVE_ErrorInd Layer 2 Status: Layer...

I've been asked what the VPN client ipsec header will be.i've found a lot of information on the web but not this info.Does any know?If anyone has any documentation on it that would be great.ThanksSam

hi, i am having troubles connecting to an asa 5505 with anyconnect vpn client:config:crypto ca trustpoint localtrust enrollment self fqdn ssl.blah.com subject-name CN=ssl.blah.com keypair sslvpnkeypair crl configurecrypto ca certificate chain localtr...

hello,I have a Cisco router that works as a VPN server. a remote user uses Cisco VPN client 5.0.05.0290 to connect to the office resources. Every one hour (or a few minutes less than one hour) after a connections is established, a message pops up on ...

I have an ASA 5505 (8.2.1) at a remote home. The ASA will connect to the HQ VPN Con 3030. The home office will have an IP phone and the user's laptop. I have successfully setup Easy VPN. I have defined port 6 and 7 to be a part of VLAN 1. VLAN 1...

Hi,We are trying to configure "transport input telnet" under line console 0. But it is throwing an error & there is no input parameter under console.Platform: 2800 & 12.4 software.Please confirm how do we solve this issue.Regards,Guru