VPN

It seems that in order to enable dhcprelay on the ASA you have to point the relay out the outside interface. Can anyone say for sure if this traffic is still getting encrypted when using the ASA as an EZVPN NEM client?I haven't had a chance to test ...

HelloI have setup a IOS Router VPN that uses IPSec with Radius Authentication. I am using Cisco VPN Client 4.8. The connection and the Authetication work great, but the client cannot connect to all Subnets. I can sometimes can connect to a specifi...

Hey guys! (PIC IS ATTACHED)Easy question here.If one of my VPN tunnels goes gown, how can I get the Concentrator to email me about it and let me know?What level of severity would it be?

Hello.I'm looking for a ASDM guide to implement L2L tunnel between a ASA 5510 with static ip and a device with a dynamic ip. I relly suck when it comes to CLI so I would like some help setting this up via ASDM. I've got it working once but that was a...

If I have a pix 501, and I have both a nat 1 statement and a global 1 statement, but I also have a "static (inside,outside) 10.10.10.0 10.10.10.0" command, does this static statement make it do a No NAT situation, if my internal network of the pix is...

Is there any way that the cisco ssl vpn relay activex control for the ASA 5500 for Web vpn can be extracted so that on the bookmark page I can have the user in stall it before they log into the application. The problem I am having is that when the u...

Hi All,I am having Cisco channelized E1/T1 card which have been configured properly. On my router I can seen 1-31 serial interfaces and have configured Interface 16(D Channel) and can dial out.My requirement is this,I have nearly 26 branch offices cu...

Hi all In one of our customer network,ip addres between ASA outside and Internet router is private ip and the Public ip range from Service provider is routed to Firefall outside (private IP).In this scenario is it possible to create L2L VPN and Re...

Hello,We have bought a Cisco 871 Router, and I cant seem to find out if we need to purchase licenses to use the VPN on this box.Is the Cisco VPN client software licensed through the Cisco router or do we need to buy licenses for each user connecting ...

Hi Folks - I have a vendor that needs remote access to some of the equipment we have on our network. I want to restrict VPN access (client based) for this vendor to only those specific IP addresses. I am thinking of doing so by specifiying only the l...

show crypto key mypubkey rsa - shows me all my keypair/certs; some are no longer in use and I'd like to delete them, but cannot see how.I've tried every clear crypto command that looks like its associated with keys/certs to no avail.Running v8.0(4)Th...

I have about 20 groups in a failed concentrator that I need to recover the group password for. This is from the concentrator and the passwords are in hex. I do not have access to the clients which I can decode. Anybody know tips on decoding the cli g...

I need to enable logging on an IOS 871 router so we can be able to tell when and what time the users made a Cisco VPN Remote Access connections?Can anyone please help on pointing me on what are the commands to allow this?thank you

Hi,I have an ASA 5510 just added to my network. I have an internet router(connecting to the outside interface of the ASA) and the following interfaces: inside,DMZ1 and DMZ2.I have the followings: LAN network connecting to the inside interface,server1...