VPN

Hi all, if I want to run web vpn on my asa, what do I need? can it all be run from the asa or do I need a server?

ASA5510 at SiteB end.1.SiteB has 2.2.2.0/24 assigned by ISP2.Configured SiteB Internal workstations to access Internet using Public iPs assigned (with nat 2) and also proviced RDP/telnet access to couple of internal machines using pubic IPs assigned....

Hi All,Trying to configure a USR 56K modem to 2801 AUX port.rtr:line aux 0 session-timeout 20 login local modem InOut modem autoconfigure type usr_courier transport input all speed 115200 flowcontrol hardware--> Modem initialised using rtr Lo0 ipteln...

Hi,I want to practise creating a site-t-site VPN at home, possible?I have a Cisco 2620 and 1721 with a crypto ISO and a Cisco 2950 switch and a cisco Pix 515 with 3Des.Could I create a VPN between 2 routers? I guess I would need to use the switch wi...

Hi,running AnyConnect Linux client version 2.2Using SLAX, and have also tried Slackware 12.1I'm having problems getting connected to my ASA device. With the Windows and Mac client is works okay - but I have not been able to get a Linux client to wor...

I am trying to setup a 1841 router to accept VPN from remote PC.I want to use a dynamic map,as i dont know the IP addresses that will be used.But, i cannot associate the dynamic map with a VTI.Is that possible?

Hi,I am setting up a new notebook with VPN Client v4.8.02. These are connected to my home net alongside my desktop, also v4.8.02. Both connect to office via pix 501 fine. When connected, desktop has internet access while notebook doesn't. The onl...

First off, I don't have the config and won't have the config until I get home tonight, but I'm throwing this out there for anyone that may have seen this in the past.I have a 871W router connected to my ISP's cable modem. I have an ASA 5505 connected...

I have configured site ti site vpn between linux & cisco 5505: while initiating connection form linux I get following message in log (cisco ASA)1.IP=*.*.*.* ,Removing peer from peer table failed , no match2.IP=34.234.2* , Header invalid (next payload...

I have a 2511 that I use in my lab as a terminal server. Connections work great, except using the command "clear line x" does not always clear the connections. I enter the command "clear line 1" and press enter. I get the [confirm] message. I press e...

Hi,I would like to know configuration details while configuring DMVPN dual hub redundancy. What are the things need to be checked before configuring DMVPN dual hub scenario? We are using 2800 series routers with VPN modules. Will it be ok to use thes...

I've got everything to work except I cant ping inside servers. Here's a ipconfig from the VPN client to the RADIUS server:Ethernet adapter Local Area Connection 3: Connection-specific DNS Suffix . :domainnamelocal IP Address. . . . . ....

HiI am from a Medium Sized Service Provider providing Internet Service via Ethernet . I am fixing a ASA5550 to do Dynamic NAT.We are having 30,000 customers under the firewall who will be Dynamically Natted to around 8000 Public IP address. The prob...

I have an ASA5510 firewall and in my DMZ I have another ASA to terminate VPNs. What ports would I need to allow through the Internet firewall to the ASA in the DMZ to allow Site to Site VPN. Thanks!