Hey guys,I'm trying to get this AP to work but for some reason even though computers can connect to it, they don't get an IP from our DHCP server, what can I do to get it to work?This AP is an autonomous AP and there are no controllers on the network...
I've read a lot and watched the recent webinar, but I still have a few questions:1) During and Event Driven RRM "The channel change is not random. It is picked based on device contention, thus it is an intelligent alternate choice.". Could you...
We have a ssc ap that couldn't use H-reap mode, and all other ap already in H-reap. The Wlan we configured for enable H-REAP Local Switching and Learn Client IP Address, the problem is when user connected to this ssc ap, they will have intermittent i...
HiI am having difficulty upgrading the software code of WCS. We have a WLSE appliance that was upgraded to a WCS. I have downloaded the latest WCS software code (7.0.172) unto my PC. However, I do not know how to upgrade the WCS, since the WLSE is a ...
HelloHas anyone been able to do this with a WLC, configuration guidlines say :""Wired guest access ports must be in the same Layer 2 network as the foreign controller."Anyone know if Cisco is working on making this solution work on L3 aswell ?Regards...
Hi,we have ordered one AIR-BR1310G-E-K9-R and one AIR-ANT2460P-R.Does the antenna come with an RF cable or do we need to order an additional RF cable?Also regarding the powering of the device: from what I read the device comes with a power injector. ...
Dear Forum members, what AP do you usually prefer for outdoor installation and what types of Antennas do you typically use for omnidirectional and or directional antennas?Thank you and have a great day,.AS
Hi allWhen I order the AP 1130 Series Eco Pack (AIR-LAP1131-EK9-10), do you know what I get?I assume this are included:- 10 1131 Access Points - Mounting KitI know that the power supply are not delivered with the 1140 Series Eco Pack. Is it the same ...
Hello All -I am looking to get some more information on the iPad in the enterprise. We are currently using Cisco wireless running a corporate SSID using WPA+WPA2 with AES and 802.1X. Is anyone running iPad's in the 802.1X enterprise? We use a Device ...
Hi,In the WLC 2112, I can connect Access Points in the available port.For example:WLC Port 1 --> Connected to Switch (802.1Q)WLC Port 5 --> AP vlan 50 (access mode)WLC Port 6 --> AP vlan 50 (access mode)WLC Port 7 --> AP vlan 50 (access mode)Thanks
Hello,Please, I need an official document from Cisco saying the APs models supported by the WLC 5508. Specially, I need to know if the AIR-AP1242AG-T-K9, converted from standalone, will be supported by the 5508.Regards,Marco Bartulihe
Hello,there are a lot of entries in the logs like the ones I show you:- AP's Interface:1(802.11a) Operation State Down: Base Radio MAC:58:bc:27:be:63:40 Cause=Radio interface reset. Status:NA- %RRM-3-RRM_LOGMSG: rrmChanUtils.c:290 RRM LOG: Airewave D...
I work for a company that installs Cisco equipment and was told that the maximum distance for optimal performance is to have the antennas no more than 5.5 inches and up to 20 inches apart. Is this statement true or false? I normally mount the 1242 AP...
