XR OS and Platforms

Hello,I am getting an error while booting the linecard : PLATFORM-NP-0-INIT_ERR : Device BST memory test failure 0x80001761 on NP channel 7 external TM memoryThere are a lot of other errors but I think it's the one related to my issue.It does a kerne...

Hi AllI am trying to upgrade my IOS-XR from 5.3.2 to 6.2.2, but fail with following errors, anyone can assist me on this , i have all all the PIE in the install , and install activate causing this  : \ 1% complete: The operation can still be aborted ...

Hi all,I've recently started working with mLACP and I'd like to know if it's compatible with L3VPNs.All cisco documentation that I've read neither shown any restriction nor examples about the integration of L3VPNs, only L2VPNs like VPLS. I'm working ...

Dear Support,We upgrading IOSxr 64 bit 6.3.2 to 6.5.3.We can not upgrade as the rootfs: has not enough free space.As a workaround we removed some unecessary packages. (on an other router we had to remove necessary package as well)After the upgrade we...

I'm currently operating an ASR9010 on IOS XR v5.3.4 with a A9K-8T-L in LC slot 1 and 2x RSP440-SE in a redundant configuration. A few weeks ago, I noticed the following errors in my log:pfm_node_rp[357]: %PLATFORM-CROSSBAR-1-SERDES_ERROR_LNK0 : Set|f...

how can I verify the vlans in IOS XR related to an interface or ARP or MAC,   I only achieved was to count ports, IDs, etc. but to verify services I need to relate to something, someone saw that case?IOS-XR#show l2vpn forwarding bridge-domain locatio...

We have used the Cisco 7600 as a combination router and switch for many years. We recently began replacing the 7600 with the ASR9000 chassis for L3 routing functions. However, we are not convinced the ASR is the right choice for L2 switching. I am lo...

Hi experts,I have a MOD160/MPA-2X40GE and QSFP-40G-SR4. I wonder if I can breakout one 40G interface into 4x10 using the breakout cable (MPO).I know this can be done in Nexus 7K with the same QSFP. Thanks.Rodrigo

Hi all, we have the following problem, our two ASRs are with bridge domain and routed BVI interface configured so that there is additionally hsrp communiaction. The interconnect links are with rewrite ingress tag pop 1 symetric configured, so that HS...

I see a SMU section for NCS 540 downloads but there is no service pack section, is this on purpose? Florian

%ASR900INTF-3-UNSUPPORTED: Interface GigabitEthernet0/5/0 is not supported in subslot 5 by the A900-IMA8T[0/5] moduleA903-RSP1A-5515.4(1)S1, RELEASE SOFTWARE But port 5/0 is unavailable for use it claims ==== ====================== ====== ===========...