Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

cannot get ip

this circuit cannot get ip , what happened?

 

RP/0/RSP0/CPU0:TYCK-601#show subscriber session filter access-interface bundle-ether 10102.1146 detail 
Mon Aug 25 18:22:30.192 Taipei
Interface:                None
Circuit ID:               TYCK-601 bundle-ether 10102 vlan-id 1146
Remote ID:                Unknown
Type:                     IP: DHCP-trigger
IPv4 State:               Up Pending, Mon Aug 25 18:22:01 2014
Mac Address:              000c.2a04.de70
Account-Session Id:       002afc8e
Nas-Port:                 Unknown
User name:                ........SD000022324-ITA-00@CHT_ANY_ITA1
Outer VLAN ID:            1146
Subscriber Label:         0x00000c81
Created:                  Mon Aug 25 18:22:01 2014
State:                    Connected
Authentication:           unauthenticated
Authorization:            authorized
Access-interface:         Bundle-Ether10102.1146
Policy Executed: 
policy-map type control subscriber radius-aaa2
  event Session-Start match-first [at Mon Aug 25 18:22:01 2014]
    class type control subscriber dhcp-initial do-until-failure [Succeeded]
      10 authorize aaa list for-local-dhcp [Succeeded]
      20 activate dynamic-template urpf [Succeeded]
Session Accounting: disabled
Last COA request received: unavailable
Pending Callbacks: 
  Waiting for internal processing to complete

RP/0/RSP0/CPU0:TYCK-601#

 

 

 


RP/0/RSP0/CPU0:TYCK-601# show dhcp ipv4 server binding 
Mon Aug 25 18:12:25.190 Taipei

                                           Lease                                                
 MAC Address      IP Address      State    Remaining       Interface          VRF      Sublabel 
--------------  --------------  ---------  ---------  -------------------  ---------  ----------
000c.2a04.de70  0.0.0.0         UNKNOWN    24         BE10102.1146         default    0x99b     

RP/0/RSP0/CPU0:TYCK-601# show dhcp ipv4 server binding 
Mon Aug 25 18:12:28.166 Taipei

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

I think we need to see the

I think we need to see the configuration and the debug of the dhcp and the subscriber policy execution to give an idea as to why the address allocation didnt occur.

For this type of troubleshooting a tac case is probably best to continue the process.

regards

xander

Xander Thuijs CCIE #6775 Principal Engineer ASR9000, CRS, NCS6000 & IOS-XR
2 REPLIES
New Member

if anyone has workaround?

if anyone has workaround? 

please contact me  

phone : +886 0934287297 (TW)

Mail: stan_huang@syscom.com.tw

Cisco Employee

I think we need to see the

I think we need to see the configuration and the debug of the dhcp and the subscriber policy execution to give an idea as to why the address allocation didnt occur.

For this type of troubleshooting a tac case is probably best to continue the process.

regards

xander

Xander Thuijs CCIE #6775 Principal Engineer ASR9000, CRS, NCS6000 & IOS-XR
49
Views
0
Helpful
2
Replies
CreatePlease to create content